The New Holland L323 is a mid-size vertical-lift Super Boom skid steer in the 300 Series, sold mainly in the Middle East, Africa and South America. It runs a 74 hp FPT 3.2L turbo diesel and is rated at 2,250 lb operating capacity, with about 129 in of hinge pin height and 32 in of reach at full height for loading trucks and spreaders. Optional high-flow hydraulics let it run demanding attachments. Below are the L323's specs, the problems we see most, and the replacement parts we carry that fit it.
Power: 74 hp (55 kW) gross / 68 hp net at 2,500 rpm
Peak Torque: 203 lb-ft (275 N·m) at 1,400 rpm
Operating Weight: 7,385 lbs (3,350 kg)
Rated Operating Capacity: 2,250 lbs (1,020 kg) at 50% of tipping load
Tipping Load: approximately 4,510 lbs (2,045 kg)
Lift Path: Vertical lift (Super Boom)
Hydraulic Pump Flow: 22.5 GPM standard / high flow optional
Hydraulic Relief Pressure: 3,046 psi
Height to Hinge Pin: 129.5 in (3,290 mm)
Dump Height / Dump Reach: 100.2 in / 31.9 in
Width: 69.8 in (1,773 mm)
Travel Speed: 7.0 mph standard / 10.5 mph two-speed option
Tires: 12x16.5
Fuel Tank: 25.5 gal (96.5 L)
Hydraulic System: 12.0 gal (45.4 L)
Common Issues & Fixes:
Oil leaking from the engine or crankcase pressure building up: A loaded-up crankcase breather pushes oil out at the seals and gaskets. Replace the crankcase breather filter 5801686484 on the service schedule.
Engine or hydraulics running hot: Hot climates and high-flow attachments push cooling systems hard. Clean the radiator and hydraulic cooler from the fan side daily, keep fluid levels at the full mark, and change the hydraulic filter on schedule.
Hard starting or loss of power: Water and dirt in the fuel are the usual causes. Change fuel filters on schedule, drain the water separator often, and buy fuel from a clean source.
Loader slop at full height: The Super Boom linkage has more pivot points than a radial arm. Worn pins and bushings show up as play at the bucket and should be replaced before they wear the bores.
Do you need your part quickly? You're in luck! We have warehouses all over the country to ensure a quick and easy delivery time. Most of our parts ship from our warehouses the same day you place your order. And many times, orders are delivered in Two to Three days.
Our in house parts are manufactured following strict quality standards in our warehouse in Ohio. Parts such as hydraulic cylinders, pins, bushings, sheet metal, track adjusters, booms and dipper sticks are all ready to ship same day that they are purchased! With less time to wait for your shipment, you will be able to get back to work as quickly as possible.
Did you accidentally purchase the incorrect part? We offer returns and exchanges here at Broken Tractor. To proceed with a return, please fill out our form, and we will provide you with return authorization and a step by step return process for your convenience. We are more than happy to help you exchange your part for the correct one! fill out our form to make a request here at Return Request Form and we would be pleased to help you.
See Details
