JD 690DLC, 690ELC, 200LC Excavator Pins & Links

Replacement dipper links, H-links, bushings, and connecting pins for John Deere 690DLC, 690ELC, and 200LC excavators, covering left- and right-hand dipper links, bucket-to-dipper pins, and closed- and open-end H-link bushings.

Fits Models At A Glance

• 690 Series: 690DLC, 690ELC
• 200 Series: 200LC, 200CLC

Key Notes

• Application: Bucket linkage rebuilds and pin/bushing replacement
• Links: Left- and right-hand dipper links and H-link assemblies
• Pins: Link-to-cylinder, link-to-dipper, and bucket-to-dipper pins
• Bushings: Closed- and open-end H-link and dipper bushings
• Seals: Bucket, link seals, and O-rings for full linkage service

Why Choose Broken Tractor

• ✅ Deep excavator linkage inventory ready to ship
• ✅ Expert help matching pins and bushings
• ✅ Fast shipping from two US locations

Frequently Asked Questions

What pins do I need to rebuild the bucket linkage on a John Deere 690ELC excavator?

Broken Tractor carries the full set of linkage pins for the 690DLC, 690ELC, and 200LC, including the link-to-cylinder pin (T144754), link-to-dipper pin (T144755), bucket-to-dipper arm pin (T144756), and bucket-to-H-link pin (T144757). A complete rebuild typically uses all four pin positions plus the matching bushings. Match your worn part to the correct part number to be sure you get the right pin for your machine.

What is the difference between the closed end and open end H-link bushings for the 690DLC?

We carry both styles for the 690DLC, 690ELC, and 200LC: the closed end H-link bushing (T139496) and the open end H-link bushing (T139495). The H-link uses different bushings at each end, so check which end you are servicing before ordering. If you are rebuilding the whole H-link, Broken Tractor also offers the H-Link with Bushings assembly (AT147405).

Do you carry both left and right hand dipper links for the 200LC?

Yes. We offer the left hand dipper link with bolt holes (AT147404) and the right hand dipper link (T159203), both fitting the 690DLC, 690ELC, 200LC, and 200CLC. The left and right links are not interchangeable, so confirm the side you need before ordering.

What seals and O-rings do I need when replacing pins and bushings on a 690ELC?

Broken Tractor carries the bucket and link seals (TH102446 and TH104472) and the linkage O-ring (TH102444) that fit the 690DLC and 690ELC excavators. Replacing seals and O-rings during a pin and bushing job helps keep out dirt and moisture that wear new parts quickly. Match the part numbers to confirm the correct seals for your linkage points.

How do I remove and install bushings on a John Deere excavator linkage?

A bushing driver tool makes pressing worn bushings out and new ones in much easier. We offer a steel Bushing Driver Removal and Installation Tool (BushingDriver) that works on excavators as well as dozers, loaders, and backhoes. Pair it with the correct closed or open end bushing for your 690DLC, 690ELC, or 200LC.