New Holland B95C Backhoe Loader – Parts, Specs & Serial Numbers

Description:

The New Holland B95C Backhoe Loader is a versatile and high-performing machine built for demanding job sites. Known for its fuel-efficient engine, advanced hydraulics, and operator-focused comfort, the B95C is a top choice for digging, trenching, loading, and lifting.

This model blends rugged power with smart controls, making it ideal for construction, utility, and agricultural applications. With multiple loader configurations (standard, tool carrier, and extend-a-hoe), the B95C adapts to a wide range of work needs.

Specifications:

Engine:

• Make: FPT (Fiat Powertrain Technologies)

• Model: F5HFL463B

• Type: Turbocharged, 4-cylinder, Tier 4 Final

• Displacement: 207 cu in (3.4 L)

• Net Power: 95 hp (71 kW)

• Emissions System: Cooled Exhaust Gas Recirculation (CEGR) + Diesel Oxidation Catalyst (DOC)

Transmission:

• Type: Powershuttle

• Speeds: 4 Forward / 4 Reverse

• Top Speed: Up to 23.7 mph (38.1 km/h)

Hydraulic System:

• Pump Type: Gear-type

• Flow Rate: 28.5 GPM (108 L/min)

• System Pressure: 3,045 psi (210 bar)

Backhoe Performance:

• Max Dig Depth (Standard): 14' 6" (4.42 m)

• Max Dig Depth (Extend-a-Hoe): 18' 5" (5.61 m)

• Bucket Dig Force: 12,933 lbs (57.5 kN)

• Reach from Swing Pivot: Up to 21' 11" (6.68 m)

Loader Performance:

• Bucket Breakout Force: 11,118 lbs (49.5 kN)

• Lift Capacity at Max Height: 7,327 lbs (3,323 kg)

• Bucket Width Options: 82 in, 86 in, 92 in

Dimensions & Weight:

• Operating Weight: ~17,560 lbs (7,968 kg)

• Transport Length: 23' 3" (7.09 m)

• Height to Cab: 9' 1" (2.76 m)

• Wheelbase: 7' 0" (2.13 m)

Maintenance Essentials:

• Hydraulic leaks: Common at hose couplings – replace with hydraulic seal kits.

• Brake wear: Frequent issue; upgrade with brake replacement kits.

• Transmission lag: Usually resolved with new transmission solenoids and filters.

• Loader bushings & pins: Worn components should be replaced using loader pin kits.

Common Issues & Quick Fixes:

• Slow Hydraulics: Check for clogged filters or weak pump – replace with OEM hydraulic pumps.

• Overheating: Often caused by clogged radiators – clean thoroughly or upgrade to new radiators.

• Starter issues: Replace aging units with reliable starter motors.

Serial Number Info:

• Serial Number Location: Stamped on a metal plate near the left-side loader arm or cab frame

• Prefix Format: Typically begins with “NH” followed by 6–7 digits

• Important for Ordering Parts: Always verify your serial number when purchasing replacement parts.

Pro Tips:

• Grease all pivot points regularly to avoid premature wear.

• Switch to synthetic transmission fluid in cold climates for smoother operation.

• Upgrade to Extend-a-Hoe configuration for deeper