JD 310E-310SK Bucket Pins, Links, Bushings

Bucket pins, H-links, bushings, and tooth hardware for John Deere 310 and 310S series backhoe loaders, covering dipper-to-bucket connections, H-link assemblies, and greaseable pin sets across E through P-Tier machines.

Fits Models At A Glance

• 310 Series: 310E, 310G, 310J, 310K, 310K EP, 310L, 310L EP, 310 G-Tier, 310 P-Tier
• 310S Series: 310SE, 310SG, 310SJ, 310SK, 310SL
• 315 Series: 315SE, 315SG, 315 P-Tier
• 325 Series: 325J, 325K, 325SL
• 410 Series: 410E, 410G, 410J, 410K, 410L, 410 P-Tier

Key Notes

• Application: Bucket, dipper, and H-link pivot points on the backhoe end
• Components: Pins, bushings, left and right hand bucket links, H-links, bucket teeth and shanks
• Design: PVE greaseable pins and USA-made parts available
• Service: Bushing driver tool available for removal and installation

Why Choose Broken Tractor

• ✅ Deep coverage across every 310 generation
• ✅ USA-made and greaseable pin options available
• ✅ Fast shipping from two US locations

Frequently Asked Questions

How do I know which bucket pins and bushings fit my John Deere 310SK?

The 310SK uses parts shared across the 310SE, 310SG, 310SJ, and 410E-K backhoes, such as our H-Link to Bucket Link Pin (SKU AT171077) and H-Link Bushing (SKU T154273). Because pin and bushing sizes can differ between the 310 and 310S series, match your machine model and the part number before ordering. If you are unsure, our parts team can help confirm the right fit.

What is the difference between the 310E-310K bucket links and the 310SE-310SK links?

Broken Tractor carries separate left and right hand bucket links for each series, so they are not interchangeable. The 310E, 310G, 310J, and 310K use SKU AT181712 (LH) and AT181713 (RH), while the 310SE-310SK and 410E-K machines use SKU AT181714 (LH) and AT181715 (RH). Confirm your model before choosing to make sure the link matches your backhoe end.

Are greaseable bucket pins available for the 310 backhoe?

Yes, we offer PVE greaseable pins for the 310 series, including the H-Link to Bucket Link Pin (SKU AT171077) for 310SE-310SK machines. Several pins are also USA-made, such as the Bucket Cylinder to H-Link Pin (SKU AT171078). Greaseable pins allow you to lubricate the pivot points to extend service life.

What bucket teeth fit a John Deere 310 backhoe?

The John Deere General Purpose Backhoe Bucket Tooth (SKU TF23) fits a wide range of 310 and 310S machines including the 310E, 310SE, 310G, 310SG, 310J, 310SJ, 310K, 310SK, and 310SL. It mounts on the Weld-On Bucket Shank (SKU U43792) and is held by the Bucket Tooth Retainer Pin (SKU TF23P). For a complete set, we also offer a Bucket Tooth Kit with shank and pin (SKU 230KITJD).

Do you have a tool to remove and install bucket bushings?

Yes, Broken Tractor offers a steel Bushing Driver Removal and Installation Tool (SKU BushingDriver) for servicing worn bushings. It is a universal tool that works on backhoes, loaders, excavators, and dozers. This makes it easier to press out old bushings and seat new ones at the bucket, dipper, and H-link pivot points.