JD Backhoe Links, Pins & Bushings

Replacement links, pivot pins, and bushings for John Deere backhoe loaders, covering new and aftermarket pin and bushing kits for boom, dipperstick, swing, and stabilizer connections across the 310, 410, and 710 series machines.

Fits Models At A Glance

• 310 Series: 310D, 310E, 310G, 310J, 310K, 310SG, 310SJ, 310SK
• 410 Series: 410D, 410E, 410G, 410J, 410K
• 710 Series: 710D, 710G, 710J, 710K

Key Notes

• Application: Boom, dipperstick, swing tower, and stabilizer pivot points
• Components: Pivot pins, bushings, and connecting links sold individually or in kits
• Wear Restoration: Replaces worn pins and bushings to eliminate slop and improve control
• Material: Hardened pins and bronze or steel bushings for extended service life

Why Choose Broken Tractor

• ✅ Fast shipping from two US locations
• ✅ Correct fitment verified by machine model
• ✅ New and aftermarket options to fit any budget

Frequently Asked Questions

How do I know if my John Deere backhoe pins and bushings are worn?

Worn pins and bushings usually show up as slop or play at the boom, dipperstick, swing tower, or stabilizer pivot points, which makes the backhoe harder to control. Replacing the worn pins and bushings eliminates that play and restores tighter, more precise movement. We carry hardened pins and bronze or steel bushings sized for these pivot connections.

What pivot points do these John Deere backhoe pins and bushings fit?

Broken Tractor carries pins, bushings, and connecting links for the boom, dipperstick, swing tower, and stabilizer pivot points on John Deere backhoe loaders. Components are offered individually or in kits so you can replace just the worn joint or refit multiple points at once.

Do these pins and bushings fit the John Deere 310, 410, and 710 series backhoes?

Yes, we carry links, pins, and bushings covering the 310 series (310D, 310E, 310G, 310J, 310K, 310SG, 310SJ, 310SK), the 410 series (410D, 410E, 410G, 410J, 410K), and the 710 series (710D, 710G, 710J, 710K). Because fitment can vary by pivot point and machine build, match the part number to your machine or confirm with our parts team before ordering.

Should I replace both the pin and the bushing at the same time?

Replacing the pin and bushing together is usually the best way to remove all the slop at a worn pivot, since a new pin in a worn bushing can still leave play. Broken Tractor offers pins and bushings individually or in matched kits so you can address the full joint. Hardened pins and bronze or steel bushings help extend service life after the repair.

Do you offer both new and aftermarket John Deere backhoe pins and bushings?

Yes, Broken Tractor carries both new and aftermarket pin and bushing options to fit different budgets. Fitment is verified by machine model, and you can match the part number to your backhoe to confirm the correct component before ordering.