New Holland L220 Skid Steer Loader – Parts, Specs & Serial Numbers

Description:

he New Holland L220 Skid Steer Loader is part of the 200 Series, built for reliability, performance, and operator comfort. Featuring a powerful Tier 4 Final engine and the iconic Super Boom® vertical lift, the L220 is ideal for lifting heavy loads to higher heights, making it perfect for construction, agriculture, and material handling tasks. Its enhanced visibility, maintenance-friendly design, and industry-leading breakout force make it one of New Holland’s most versatile skid steers.

Whether you're replacing hydraulic cylinders, filters, or drive motors, Broken Tractor has the L220 parts you need.

✅ Key Specifications:

Engine:

• Make: FPT (Fiat Powertrain Technologies)

• Model: F5H FL413B Tier 4 Final

• Type: 4-cylinder turbocharged diesel

• Displacement: 2.2 L (135 cu in)

• Gross Horsepower: 64 HP

• Net Horsepower: 60 HP

Transmission:

• Hydrostatic drive with dual joystick or mechanical controls

• Single-speed standard (2-speed optional)

• Travel Speed: 7.3 mph (11.9 mph with 2-speed)

Hydraulic System:

• Standard Flow: 18.9 GPM @ 3,050 PSI

• High Flow (optional): 26.5 GPM

• Hydraulic Pressure: 3,050 PSI

• Couplers: Flat-faced quick-connect

Lift & Dimensions:

• Lift Type: Super Boom® Vertical Lift

• Rated Operating Capacity: 2,000 lbs

• Tipping Load: 4,000 lbs

• Operating Weight: 6,470 lbs

• Height to ROPS: 78.7 in

• Width (standard tires): 66 in

• Bucket Hinge Pin Height: 123 in

Maintenance Essentials:

Maximize uptime with these top L220 maintenance parts:

• Hydraulic Cylinder Seal Kits

• Loader Pins & Bushings

• Fuel, Oil, and Air Filters

• Radiator & Cooling Components

• Drive Motor & Final Drive Assemblies

• DEF System Components (Tier 4 Final)

Common Issues & Fixes:

• DPF Regen Problems → Common with Tier 4 engines; ensure proper operating temp and cycle. Replacement DEF and DPF components available.

• Hydraulic Leaks → Check hoses, fittings, and cylinder seals. Use OEM seal kits.

• Drive Motor Wear → Noisy operation or hesitation in travel; inspect motor and replace as needed.

• Error Codes or Limp Mode → Often tied to emissions sensors or fuel delivery issues.

Serial Number Location:

• Found on a metal plate near the rear of the machine, typically on the left side frame rail or inside the engine compartment.

• Format: NDM123456

• Serial number is essential when ordering model-specific parts.

Pro Tips:

• Let engine idle after high-load use to cool turbocharger before shutdown.

• Perform DPF regeneration fully and regularly to prevent forced maintenance.

• Check tire wear and inflation weekly to prevent alignment issues.

• Use only New Holland-approved DEF to avoid injector damage.