New Holland LS180B Skid Steer Loader – Parts, Specs & Serial Numbers

Description:

The New Holland LS180B Skid Steer Loader is an upgraded version of the original LS180, offering improved visibility, cab comfort, and enhanced hydraulic performance. Popular on farms, job sites, and landscaping crews, the LS180B balances heavy-duty power with compact agility. It features a reliable 4-cylinder turbo diesel engine, robust lift capacity, and the iconic Super Boom vertical lift design.

Whether you need to service your loader or replace key components like hydraulic cylinders, starters, or loader pins, you'll find dependable New Holland LS180B parts at Broken Tractor.

✅ Key Specifications:

Engine:

• Make: New Holland (N844T)

• Type: 4-cylinder, turbocharged diesel

• Displacement: 2.2 L (135 cu in)

• Gross Horsepower: 60 HP

• Net Horsepower: 56 HP

Transmission:

• Dual Hydrostatic Drive

• Single-speed (2-speed optional)

• Travel Speed: 7.3 mph (11.6 mph with 2-speed)

Hydraulic System:

• Standard Flow: 18.5 GPM @ 3,000 PSI

• High Flow (optional): 25 GPM

• Hydraulic Pressure: 3,000 PSI

• Controls: Pilot or Mechanical (model dependent)

Performance & Dimensions:

• Rated Operating Capacity: 2,500 lbs

• Tipping Load: 5,000 lbs

• Operating Weight: ~7,600 lbs

• Wheelbase: 42.4 in

• Width (bucket): 69 in

• Height to Top of ROPS: 77.8 in

• Dump Reach @ Max Height: 28.3 in

Maintenance Essentials:

Regular maintenance is key to long machine life. Shop these LS180B essentials:

• Hydraulic Cylinder Seal Kits

• Starter Motors & Alternators

• Loader Pins & Bushings

• Air, Oil & Fuel Filters – Change every 250 hours

• Drive Motor & Axle Seals

• Cooling system flush annually

Common Issues & Fixes:

• Hydraulic Hose Leaks → Inspect for cracks or wear. Replace with OEM-quality hoses or hydraulic kits.

• Loader arm play or noise → Likely worn pins/bushings. Use a pin and bushing replacement kit.

• Starter or battery drain → Replace starter and inspect key switch.

• Two-speed not engaging → Check solenoids and hydraulic charge pressure.

Serial Number Location:

• Located inside the cab on the left-side upright post or just behind the seat.

• Format: N7M123456 or similar

• Always reference this when ordering replacement parts.

Pro Tips:

• Grease loader pivots daily during heavy use.

• Use New Holland-approved hydraulic and engine oils for longevity.

• Clean battery terminals and relays to avoid starting/electrical issues.

• Monitor high-flow attachments carefully—overheating is a risk.