Case CX37C Mini Excavator – Parts, Specs

Description:

Serial Number Location

The serial number plate on the Case CX37C is typically located on the right-hand side of the lower cab frame, just below the windshield.

Always verify the serial number before ordering parts to ensure compatibility with your specific model.

Key Specifications

• Years Manufactured: 2017 – Present

• Engine: Yanmar 3TNV88F-ESHYB, Tier 4 Final compliant

• Net Power: 23.7 hp @ 2,200 rpm

• Displacement: 100.2 cu in

• Operating Weight: 7,990 lbs

• Max Digging Depth: 10 ft 3 in

• Max Reach at Ground Level: 17 ft 1 in

• Swing Speed: 9.5 rpm

• Travel Speed: Up to 2.6 mph

• Dimensions (L×W×H): 15 ft 8 in × 5 ft 8.5 in × 8 ft 2.5 in

• Tail Swing Radius: 2 ft 10 in

• Hydraulic Flow Rate: 19.8 gal/min

• Hydraulic Pressure: 3,270 psi

• Fuel Tank Capacity: 10.6 gallons

• Hydraulic System Fluid Capacity: 15.9 gallons

• Engine Oil Capacity: 1.8 gallons

• Cooling System Capacity: 1.5 gallons

• Swing Drive Fluid Capacity: 2.1 gallons

• Undercarriage: 4 track rollers per side

• Ground Pressure: 4.9 psi

• Drawbar Pull: 6,834 lbs 

Performance & Design Highlights

• Zero Tailswing Design: Allows operation in confined spaces without compromising performance.

• Adjustable Boom: Can be offset to the left or right, enhancing versatility in tight job sites.

• Operator Comfort: Spacious cab with ergonomic controls and excellent visibility.

• Standard Features: Includes auxiliary hydraulics and backfill blade; optional angled blade available.

Routine Maintenance

• Engine Oil & Filter: Replace every 500 hours.

• Hydraulic Oil & Filters: Replace every 1,000 hours.

• Fuel Filter: Replace every 500 hours.

• Air Filter: Inspect every 250 hours; replace as needed.

• Track Tension: Check and adjust regularly to prevent excessive wear.

• Grease Points: Lubricate all pivot points daily to ensure smooth operation.

Common Issues & Fixes

• Hydraulic Leaks: Regularly inspect hoses and connections; replace damaged components promptly.

• Electrical Problems: Check battery connections and fuses; ensure wiring is intact and free from corrosion.

• Engine Overheating: Keep radiator and cooling system clean; monitor coolant levels and replace as necessary.

• Track Wear: Maintain proper tension and inspect for damage; replace worn tracks to prevent further issues.

• Control System Errors: Check for software updates and calibrate controls as needed; consult the operator's manual for troubleshooting steps.