JD 310, 410, 510, 610 Backhoe Bucket Pins & Links

Replacement bucket pins, links, H-links, and bushings for John Deere backhoe loaders, covering dipper-to-bucket pins, bucket cylinder pins, coupler bushings, pivot pins, and bucket link assemblies with installed bushings across the 310, 410, 510, and 610 series.

Fits Models At A Glance

• 310 Series: 310, 310A, 310B, 310C, 310D, 315C, 315D
• 410 Series: 410, 410B, 410C, 410D
• 500/510 Series: 500, 500A, 500C, 510B, 510C, 510D, 515B
• 610 Series: 610B, 610C
• 200 Series: 210C

Key Notes

• Application: Bucket linkage pins, H-links, cylinder pins, and bushings
• Serial Break: Many D-series pins vary by serial number, verify before ordering
• Assemblies: Bucket links and H-links available with bushings installed
• Service: Bushing driver tool available for removal and installation

Why Choose Broken Tractor

• ✅ Correct fitment matched to your serial number
• ✅ Fast shipping from two US locations
• ✅ New and used linkage components available

Frequently Asked Questions

How do I know if my John Deere backhoe bucket pins are worn out?

Worn bucket pins and bushings usually show up as excessive play or side-to-side movement at the bucket, sloppy linkage, and knocking or clunking when you curl or dump. Elongated pin bores and scored pins are common signs that both the pin and bushing need replacing. We carry dipper-to-bucket pins, cylinder pins, and matching bushings for the 310, 410, 510, and 610 series to correct that slop.

Do bucket pins for the John Deere 310D and 410D vary by serial number?

Yes, many D-series pins change at a serial break, so the correct part depends on your machine's serial number. For example, our bucket cylinder pin tube end (SKU T145346) fits 310D and 315D after serial number 787761 and 410D after serial number 787396, while lower mounting pins split by other serial ranges. Match the part number to your serial number or confirm with our parts team at (800) 909-7060 before ordering.

Should I replace both the bucket link pins and bushings together?

Replacing pins and bushings as a set is the best practice, since installing a new pin into a worn bushing leaves play and wears the new pin quickly. We offer bucket links and H-links with bushings already installed, such as SKU AT146005 and SKU AT158567, along with separate bushings and pins so you can rebuild the full linkage.

What bucket pins fit a John Deere 310C backhoe?

We carry several 310C linkage pins including the dipper-to-bucket pin (SKU T125926), dipper-to-H-link pin (SKU T125929), bucket-to-bucket link pin (SKU T125931), and bucket cylinder to bucket link pin (SKU T125939). We also stock 310C-specific pins like the swing cylinder rod to swing tower pin (SKU T100378). Match the pin location on your machine to the correct part number for proper fitment.

Do you sell bucket link and H-link assemblies for John Deere backhoes with bushings installed?

Yes, Broken Tractor offers complete bucket links and H-links with bushings already pressed in. The bucket link SKU AT146005 fits 310C, 310D, 410C, 410D, 510C, and 610C, and the bucket H-link SKU AT158567 fits 310C, 310D, 410C, 410D, 510C, and 510D. A bushing driver tool is also available to help with removal and installation.