Case Backhoe Brakes

Brake components for Case backhoe loaders, including brake shoes, drums, master cylinders, wheel cylinders, brake discs, and seal kits spanning multiple generations of Case 580, 590, and 570 series machines. Whether you're rebuilding a worn brake assembly or replacing a failed master cylinder, these parts cover both wet and dry brake configurations across a wide range of Case backhoe platforms.

Fits Models At A Glance

• 570 Series: 570, 570MXT, 570ST
• 580 Series: 580B, 580C, 580D, 580E, 580K, 580L, 580M, 580N, 580 Super E, 580 Super K, 580 Super L, 580 Super M, 580 Super N
• 585 Series: 585E, 585G
• 590 Series: 590, 590SN, 590 Super N, 590 Super R
• 695 Series: 695SM, 695ST

Key Notes

• Brake Types: Wet disc brakes and dry drum brakes covered depending on model year and configuration
• Components Available: Master cylinders, wheel cylinders, brake shoes, drums, disc packs, and rebuild seal kits
• Fitment Verification: Confirm serial number and brake configuration before ordering - early and late model variants differ
• OEM Cross-Reference: Parts match original Case OEM specifications for direct replacement

Why Choose Broken Tractor

• ✅ Broad Case backhoe brake coverage across decades of models
• ✅ Competitive pricing with fast shipping from our warehouses
• ✅ Knowledgeable staff ready to assist with parts lookup

Frequently Asked Questions

What Case backhoe brake parts does Broken Tractor carry?

Broken Tractor carries master cylinders, wheel cylinders, brake shoes, drums, brake discs, disc packs and rebuild seal kits for Case backhoes. Coverage spans the 570, 580, 585, 590 and 695 series, including the 580B through 580N, the 580 Super E through Super N, and the 590 Super N and Super R. These parts match original Case OEM specifications for direct replacement.

Why are the brakes not working on a Case 580C?

Brakes that stop working on a Case 580C usually come down to a failing master cylinder, leaking wheel cylinders or worn brake shoes or discs. We carry replacement master cylinders, wheel cylinders and rebuild seal kits, along with friction parts for both drum and disc setups. Inspect the hydraulic components and the friction parts to find the worn part before ordering.

What parts do I need to change brakes on a Case 580C backhoe?

The parts depend on how your Case 580C is configured, because Case backhoes use either dry drum brakes or wet disc brakes depending on model year and setup. Drum brake machines use brake shoes and drums, while wet brake machines use brake discs and disc packs. Master cylinders, wheel cylinders and seal kits may also be needed if the hydraulic side is leaking or worn.

Do Case backhoe brake parts fit every Case backhoe model?

No, Case backhoe brake parts are not universal, and early and late versions of the same model can use different brake parts. Confirm your serial number and brake configuration before ordering, and match the part number to your old part when possible. For help with a lookup, call (800) 909-7060.

Should I rebuild or replace a Case backhoe master cylinder?

You can do either one, since Broken Tractor offers rebuild seal kits as well as complete replacement master cylinders for Case backhoes. A seal kit fits a master cylinder that is still serviceable but leaking at the seals. A complete master cylinder is the better choice when the unit has failed.