Case 580L-SN Loader Pins & Bushings

Front axle components for Case 4WD backhoe loaders, covering the 580K, 580SK, and 590T series machines. These parts include axle shafts, hubs, spindles, steering knuckles, tie rod ends, and related hardware for machines equipped with the front drive axle option.

Fits Models At A Glance

• 580K Series: 580K (4WD)
• 580SK Series: 580SK, 580 Super K (4WD)
• 590T Series: 590T (4WD)

Key Notes

• Application: 4WD front drive axle equipped backhoe loaders only - verify your machine has the front axle option before ordering
• Component Types: Axle shafts, hubs, spindles, steering knuckles, tie rod assemblies, and seals
• Fitment Tip: Cross-reference your machine serial number and axle manufacturer to confirm part compatibility
• Condition: New and used front axle parts available across all three series

Why Choose Broken Tractor

• ✅ Covers multiple Case backhoe generations and axle types
• ✅ New and used parts available for budget flexibility
• ✅ Fast shipping from Baton Rouge, LA and Kimbolton, OH

Frequently Asked Questions

What loader pins fit a Case 580L or 580 Super L backhoe?

Broken Tractor carries several loader pins listed for the Case 580L and 580 Super L. These include the right-hand lift cylinder rod pin (113629A1), the left lift cylinder rod pin (118900A1), the bucket cylinder rod end pin (116339A1), the upper and lower bucket pin (118901A1), the lift cylinder tube end pin (119129A1) and the loader frame pivot pin (111522A1). Because fitment can change by model and serial number, match the part number on your old pin or call (800) 909-7060 to confirm before ordering.

Which loader pins fit a Case 580N or 580 Super N?

For the Case 580N and 580 Super N, we carry the lift cylinder rod to frame pin (84216891) and the bucket tilt link to frame pin (84270815). Both pins are also listed for the 580 Super M, and some 580 Super M machines use different pins, such as the lift cylinder rod to frame pin 87623771. Check your serial number or match the old part number to make sure you get the correct pin.

What loader bushings fit a Case 580 Super M backhoe?

Broken Tractor offers a range of loader bushings listed for the Case 580 Super M. These include the loader frame pivot and front axle pivot bushing (D127542), the loader bucket bushing (D129264), the bucket cylinder trunnion bushing for the tube end (G108512) and the tube end bushing (1980335C1). We also carry a steel bushing driver tool designed for removing and installing bushings.

Do you carry snap rings and hardware for Case 580 loader pins?

Yes, we carry snap rings and fasteners to go with Case 580 loader pins. Options include a snap ring for 1-1/2 inch pins (D25279), a snap ring for 1 3/4 inch pins (103-16175), a 50 millimeter external snap ring for the 580L through 580 Super N (87016943) and a 40 millimeter snap ring (86625153). We also offer a matching bolt (827-20190) and nut (829-1420) listed for the 580L, 580 Super L, 580M and 580 Super M.

Can I get a rebuilt loader bucket tilt cylinder for a Case 580L?

Yes, Broken Tractor offers a rebuilt loader bucket tilt cylinder for the Case 580L (175238A1). A separate rebuilt tilt cylinder (113133A2-R) is listed for the 580 Super L, 590 Super L and some 580M machines. Fitment on certain models is marked as conditional, so confirm the part number on your existing cylinder before ordering.