Engine Radiator Core for Caterpillar 950F, 950F II & 960F Loaders | 4P0893

Fits Models At A Glance:

• Caterpillar Wheel Loaders: 950F, 950F II, 960F

Key Notes:

• Part Number: 4P0893 (Caterpillar reference 4P-0893)
• Type: Engine radiator core - core only, no tanks or frame
• Function: Carries engine coolant through the tube and fin mesh and transfers its heat into the air passing through
• Material: Carbon steel with alloy copper
• Weight: 36.0 lbs.
• Condition: Aftermarket replacement part
• Application: Replaces the engine radiator core on Caterpillar 950F, 950F II and 960F wheel loaders
• Shipping Restrictions: Ships to the lower 48 US states only
• Note: This is the ENGINE RADIATOR core, not the oil cooler core. Caterpillar catalogues a separate oil cooler core, 4P-0251, against these same three loaders - if oil temperature rather than coolant temperature is the complaint, that is the part you want. Tanks, side frames, hoses, cap and hardware are not included. Caterpillar publishes no dimensions; measure before ordering. Ships LTL freight.

Common Use Case or Symptoms:

Fit this when coolant temperature climbs on a hot afternoon with the fan and belts proven good, or when the core is weeping at a tube - a loader that spends its day in and out of a stockpile packs its core from the face and loses cooling long before it ever drips.

Why Choose Broken Tractor?

• ✅ Coolant Circuit Not Oil: This core carries engine coolant - the oil cooler on these same loaders is a separate part number, and the two are easy to confuse by machine alone.
• ✅ Solderable Tube Stack: Alloy copper over carbon steel, so a weeping tube can be closed up by a radiator shop instead of ending the core.
• ✅ Lighter Than The Oil Cooler: 36 lbs against 53 lbs for the oil cooler core on the same machines - a straightforward way to tell which one came out.