Rear Wheel Assembly 16.9-28 for Caterpillar 422E-434E Backhoes | 1956348

Fits Models At A Glance:

• Caterpillar Backhoe Loaders: 422E, 424B, 424B HD, 428E, 432E, 432F, 434E

Key Notes:

• Part Number: 1956348 (Caterpillar reference 195-6348)
• Position: Rear Wheel
• Rim Size: W15L x 28 in
• Tire Size: Built for 16.9-28
• Dimensions: 767 mm outside diameter, 411 mm wide
• Hub Bore: 283 mm
• Bolt Holes: 10 holes, 22 mm diameter
• Material: Steel
• Weight: 135.9 lbs.
• Condition: Aftermarket replacement part
• Application: Replaces the rear wheel on Caterpillar 422E through 434E backhoe loaders and the 424B
• Shipping Restrictions: Ships to the lower 48 US states only
• Note: TEN BOLT HOLES AND A 283 MM BORE - this is a different hub pattern from the 8 hole, 140 mm bore rear rim used on the C and D Series machines, so the two do not interchange even at the same 28 in diameter. The supplier catalog labels this the LEFT HAND rear and lists 1956345 as the right hand side; Caterpillar publishes no hand designation on either number, so confirm before ordering a pair. Wheel only; tire, valve, studs and nuts are not included. Ships LTL freight.

Common Use Case or Symptoms:

Order this when an E Series rear wheel is cracked at the disc, rusted at the bead seat or has taken a hit hard enough to run out of true - a rear wheel on a backhoe carries the machine, the load and the digging reaction all at once, and a compromised rim is not worth running.

Why Choose Broken Tractor?

• ✅ Ten Hole E Series Pattern: 283 mm bore and ten 22 mm holes, which is what separates the E Series rear from the eight hole C and D Series wheel at the same diameter.
• ✅ Handing Question Answered Honestly: The supplier calls it a left hand wheel and names a right hand counterpart; Caterpillar publishes no handing at all, and the listing says so.
• ✅ Full Dimensional Record: Outside diameter, width, bore and hole count all published, which is more than most rims in this range carry.