Rear Wheel Rim 18.4-26 for Caterpillar 416D-442D Backhoes | 2713050

Fits Models At A Glance:

• Caterpillar Backhoe Loaders: 416D, 420D, 424D, 428C, 428D, 432D, 438D, 442D

Key Notes:

• Part Number: 2713050 (Caterpillar reference 271-3050)
• Position: Rear Wheel
• Rim Size: 16 x 26 in, listed by rim suppliers as W15 x 26 or W16 x 26
• Tire Size: Built for 18.4-26
• Offset: ET-0
• Material: Structural and alloy steel
• Weight: 110.3 lbs.
• Condition: Aftermarket replacement part
• Application: Replaces the rear wheel rim on Caterpillar 416D through 442D backhoe loaders
• Shipping Restrictions: Ships to the lower 48 US states only
• Note: CHECK YOUR REAR RIM DIAMETER FIRST. This is a 26 in rim for an 18.4-26 tire. The same machines were also built with 28 in and 24 in rears depending on market and options, and none of the three interchange. Measure the rim on the machine before ordering. Caterpillar publishes only the material for this number - no diameter, width, bolt circle or hole count - so the rim figures shown come from rim suppliers. Wheel only; tire, valve, studs and nuts are not included. Ships LTL freight.

Common Use Case or Symptoms:

Fit this when the 26 in rear rim is cracked, corroded at the bead or bent out of true - a wide rear rim like this on a machine that spends its life on stabilizers takes its punishment from rock and curbs rather than from mileage, and damage tends to be sudden.

Why Choose Broken Tractor?

• ✅ Wide Rim For A Wide Tire: 16 in of rim width for an 18.4-26, which is the flotation setup rather than the standard narrow rear.
• ✅ Three Rear Sizes Exist: These machines were built with 24, 26 and 28 in rears - the listing names all three so the tape measure comes out first.
• ✅ Source Of Every Figure Stated: Caterpillar publishes only the material for this number, so the rim dimensions are credited to rim suppliers rather than presented as OEM data.