Case TV370 Track Loader – Parts, Specs

Description:

Serial Number Location

The serial number plate is located on the right-hand side of the lower track frame, near the rear final-drive housing. Verify it before ordering parts to ensure accurate fitment.

Key Specifications

• Model Years: 2025 – Present

• Engine: 7.6 L, 6-cylinder diesel, Tier 4 Final

• Net Power: 370 hp @ 2,400 rpm

• Operating Weight: 57,000 lb (with full fuel and standard bucket)

• Rated Operating Capacity: 22,000 lb

• Tipping Load: 44,000 lb

• Bucket Breakout Force: 70,000 lb

• Lift Height (to bucket hinge pin): 14 ft 0 in

• Ground Speed: Up to 12 mph (two-speed travel)

• Ground Pressure: 10.5 psi

• Track Width: 18 in

• Track Length on Ground: 12 ft 0 in

• Overall Width (with bucket): 9 ft 6 in

• Cab Height: 10 ft 2 in

• Fuel Tank Capacity: 85 gallons

• Hydraulic System Capacity: 90 gallons

• Auxiliary Hydraulic Flow: 75 gpm

• Hydraulic Operating Pressure: 5,200 psi

Performance & Design Highlights

• Extreme-Class Capacity: 22,000 lb rated operating capacity with 70,000 lb breakout force—built for heavy applications

• Ultra-High-Flow Hydraulics: 75 gpm flow-sharing pump delivers strong and smooth attachment function

• Premium Cab: ROPS/FOPS-certified with heated and air-ride suspension seat, full automatic HVAC, panoramic visibility, and rear camera

• Two-Speed Travel: 12 mph max travel; low-speed mode offers control during loaded operations or tough terrain

• Verdict Undercarriage: Reinforced rollers and robust tracks optimized for longevity in abrasive conditions

Routine Maintenance

• Engine Oil & Filter: Service every 500 hours

• Hydraulic Fluid & Filters: Change fluid every 1,000 hours; replace filters every 500 hours

• Fuel Filter: Replace every 500 hours

• Air Filter: Inspect every 250 hours; replace as needed

• Track Tension & Undercarriage: Inspect and grease daily

• Cooling System: Clean radiator and cooler cores weekly; check coolant level

Common Issues & Fixes

• Track Wear or Misalignment: Daily inspection of tension, rollers, and sprockets; replace worn parts promptly

• Hydraulic Hose Wear: Check hoses and fittings daily—replace any showing abrasion or leakage

• Overheating: Keep coolers and radiator core clean; monitor coolant condition

• Electrical / Sensor Alerts: Use onboard diagnostics to check wiring, fuses, and sensor connections

• Loss of Breakout Force: Replace worn bucket teeth and ensure hydraulic fluid and filters are maintained