Front Axle Spindle Steering Bearing Spacer Washer for Case 430CK–580B Backhoes – A36565

Fits Models At A Glance:

• Case Backhoe Loaders & Tractors: 430CK, 480B, 480CK, 530CK, 580, 580B

Key Notes:

• Part Numbers: A36565, A28231, O10868AB
• Weight: 0.20 lbs (0.09 kg)
• Inside Diameter: 51.2mm (2")
• Outside Diameter: 66.67mm (2-5/8")
• Thickness: 6.35mm (1/4")
• Location: Front axle spindle — the lower steering bearing spacer washer that sits under the thrust bearing at the front axle spindle on applicable Case backhoe loaders and tractors
• Application: Front axle spindle lower steering bearing spacer washer — supports and spaces the lower thrust bearing on the front axle steering spindle, maintaining proper bearing preload and spindle alignment during steering on applicable Case equipment
• Important Note: Both a 1/4" thick and a 3/8" thick washer were used on these machines at different production points — verify your existing washer thickness before ordering to confirm correct replacement. This listing is for the 1/4" (6.35mm) thick washer

Common Use Case or Symptoms: Use when the front axle steering spindle has excessive play, the front wheels wander during operation, or the lower spindle bearing shows signs of wear — a missing or worn spindle spacer washer causes incorrect bearing preload, accelerated thrust bearing wear, and loose front axle steering on applicable Case backhoe loaders and tractors.

Why Choose Broken Tractor:

• ✅ Thickness Verification Critical: A36565 is the 1/4" (6.35mm) thick spindle spacer washer — both 1/4" and 3/8" thick washers were used on these machines. Measure your existing washer thickness before ordering to ensure correct replacement and proper bearing preload
• ✅ Three Part Number Coverage: A36565 replaces A28231 and O10868AB — covers all applicable production variants of the Case 430CK through 580B front axle spindle lower steering bearing spacer washer
• ✅ Fast Shipping from a U.S.-Based Team: In-stock and ready to ship from our U.S. warehouses