Dipper Stick to Bucket Bushing for Case 580M & 580 Super M Backhoes – 87451279

Fits Models At A Glance:

• Case Backhoe Loaders — 580M Series: 580M Series 2, 580M Series 3
• Case Backhoe Loaders — 580 Super M Series: 580 Super M Series 2, 580 Super M Series 3, 580 Super M+, 580 Super M+ Series 2, 580 Super M+ Series 3

Key Notes:

• Part Number: 87451279
• Weight: 1.17 lbs (0.529 kg)
• Inside Diameter: 44.57mm (1-3/4")
• Outside Diameter: 57.15mm (2-1/4")
• Length: 68mm (2-11/16")
• Location: Standard Dipper stick end at bucket — the bushing at the lower end of the dipper stick where it connects to the bucket
• Used With: 87451280 Spacer (sold separately)
• Note: Does not fit models with an extendible dipper stick. This bushing is not included in the standard dipper stick assembly — it must be purchased separately. Fits without use of O-rings. Confirm your dipper stick configuration before ordering

Common Use Case or Symptoms: Use when the dipper stick to bucket connection has excessive play, the bucket is loose or sloppy at the lower dipper pin, or visible wear grooves are present in the bushing bore — worn dipper stick bucket bushings cause imprecise bucket control, accelerated pin wear, and bucket movement during digging on applicable Case backhoe loaders.

Why Choose Broken Tractor:

• ✅ Sold Separately for Targeted Replacement: 87451279 is not included in the standard dipper stick assembly — available here individually so you can replace only the worn bushing without purchasing a complete assembly or kit
• ✅ Correct M/Super M Platform Dimensions: Machined to 44.57mm ID x 57.15mm OD x 68mm length specifically for the 580M and 580 Super M dipper stick to bucket pivot — confirm your dipper stick configuration before ordering
• ✅ Fast Shipping from a U.S.-Based Team: In-stock and ready to ship from our U.S. warehouses