Case 350 Crawler Dozer

Description:

Case 350 Dozer Overview

Designed for small to mid-scale grading, clearing, and construction jobs, the Case 350 combines operator visibility, efficient hydraulics, and rugged reliability. With a modest footprint and a powerful Case 188 4-cylinder diesel engine, this machine remains popular with contractors and collectors alike.

⚙️ Case 350 Dozer Specifications

Here’s a breakdown of the factory specifications for the Case 350 Dozer:

• Production Years: 1976–1979
• Engine: Case G188D, 4-cylinder diesel
• Horsepower: 44 HP (Gross)
• Displacement: 3.1L (188 cubic inches)
• Fuel Capacity: 40 gallons
• Hydraulic Fluid Capacity: 15 gallons
• Operating Weight: 17,300 lbs
• Transmission: Manual shift with multiple forward and reverse gears
• Hydraulic System: Open center, 15 GPM flow
• Blade Width: 6 ft 6 in
• Blade Capacity: 1.5 cubic yards
• Maximum Blade Lift: 30 inches
• Track Width: 16 inches
• Ground Clearance: 14 inches
• Travel Speed: Up to 6.5 mph
• Turning Radius: 6 ft 4 in
• Undercarriage: 5 rollers per side
• Operator Station: Open ROPS with basic controls

Maintenance Tips for Case 350 Owners

Like any older machine, the Case 350 Dozer requires routine checks to keep it in top condition. Here are a few key areas to monitor:

✅ Engine & Lubrication

• Change oil every 100 hours
• Replace fuel and air filters regularly
• Monitor coolant levels, especially in hot environments

✅ Hydraulics

• Check hoses for leaks or dry rot
• Top off fluid before operating
• Clean the hydraulic screen during each oil change

✅ Undercarriage & Track

• Adjust track tension every 50 hours
• Inspect rollers, idlers, and sprockets for wear
• Keep the track frame clear of debris

✅ Blade & Attachments

• Grease blade pins and bushings weekly
• Replace cutting edges and corner bits as needed
• Check cylinder rods for nicks or pitting

Common Case 350 Replacement Parts

While some parts may be harder to source, common wear items and rebuild kits are still available, including:

• Engine overhaul kits (G188D)
• Blade pins, bushings, and cutting edges
• Hydraulic lift and angle cylinders
• Track rollers, idlers, sprockets
• Transmission rebuild parts

Want help sourcing these? Contact us or browse our available parts collections!