Bobcat 610 Skid Steer Loader - Parts, Specs & Serial Numbers

Description:

The Bobcat 610 Skid Steer Loader is a vintage, dependable workhorse from the 1970s and 1980s lineup, known for its rugged build and simplicity. Powered by a robust gasoline engine and featuring a manual lever-operated transmission, the 610 remains a popular choice among vintage equipment enthusiasts, farmers, and small contractors due to its ease of maintenance and ready availability of parts.

Specifications & Features:

• Engine: Wisconsin VH4D, 4-cylinder air-cooled gasoline engine

• Engine Power: Approx. 30 hp

• Hydraulic Pressure: 1,500 psi

• Pump Flow: 10 GPM

• Rated Operating Capacity: 1,200 lbs

• Operating Weight: Approx. 4,000 lbs

• Lift Type: Radial lift

• Transmission: Chain drive, clutch/brake steering

• Travel Speed: Up to 6.5 mph

• Tires: 7.00x15 standard

Common Maintenance Needs:

• Hydraulic cylinder seal kits: A frequent fix for aged lift/tilt cylinders – Shop Bobcat 610 Hydraulic Kits

• Wisconsin VH4D parts: Tune-up kits, starters, and carburetors – Find Wisconsin Engine Parts

• Chain drive components: Sprockets, chains, and tensioners wear over time

• Steering clutch/brake parts: Require periodic adjustment or replacement

Common Issues & Quick Fixes:

• Engine won’t start: Check ignition coil, plugs, or rebuild carb

• Hydraulic arm drift or leak: Rebuild lift and tilt cylinders with new seals

• Brake/clutch issues: Re-tension linkages or replace worn pads

• Chain case oil leaks: Replace chain case gaskets or input shaft seals

Pro Tips:

• Always grease all fittings after 8–10 hours of use to reduce pin/bushing wear

• Maintain correct belt tension for the engine cooling fan

• Use SAE 30 non-detergent oil for VH4D engine longevity

• Store in a covered area to protect electrical components and hydraulic hoses

Serial Number Location:

The serial number plate is typically located on the loader frame near the engine compartment or under the operator seat platform.