ZF Front Axle Hub, Swivel & Planetary - 210C-410G

Front axle hub, steering swivel, and planetary components for John Deere backhoe loaders equipped with ZF four-wheel drive axles, covering hub bearings, king pins, drive shafts, planetary gears, ring gears, and complete corner assemblies across the 210C through 410G machines.

Fits Models At A Glance

• 200 Series: 210C, 210K, 210LE
• 300 Series: 300D
• 310 Series: 310D, 310E, 310G, 310J, 310K, 310L, 310SE, 310SG, 310SJ, 310SK, 310SL
• 315 Series: 315D, 315SE, 315SG, 315SJ, 315SK, 315SL
• 325 Series: 325J, 325K, 325SK, 325SL
• 400 Series: 410D, 410E, 410G, 410J, 410K, 410L, 482C, 510D

Key Notes

• Application: ZF-supplied MFWD front axle repair on 4WD backhoes
• Coverage: Hubs, bearings, seals, king pins, swivels, planetary gears, ring gears
• Assemblies: Loaded planetary units, corner assemblies, king pin kits
• Condition: New replacement components and complete kits

Why Choose Broken Tractor

• ✅ Deep coverage of ZF axle repair parts
• ✅ Fast shipping from two US locations
• ✅ Experienced help matching your serial number

Frequently Asked Questions

What John Deere front axle hub bearing fits a 310G vs a 310J backhoe?

Broken Tractor carries two front axle hub bearings for John Deere backhoes with ZF axles, and the right one depends on your model. JD10250 is listed for earlier machines such as the 310E, 310SE, 315SE, 410D, 410E and 410G, with the 310G, 310SG and 315SG fitting by serial number. JD10249 covers a wider range that includes the 310J, 310K, 310L, 315SJ through 315SL, 325J, 325K and 410J through 410L. Match the part number on your old bearing or confirm your serial number before ordering.

Does the John Deere backhoe king pin kit depend on serial number?

Yes, fitment of the 4WD steering axle king pin kit (T188397-Kit) depends on serial number for several models. It is listed for the 315D after S/N 796034, the 510D after S/N 796855 and the 210LE before S/N 888000. It also fits the 310E, 310SE, 315SE, 410E, 310G, 310SG, 315SG and 410G. If you are unsure which applies to your machine, call (800) 909-7060 with your serial number.

Can I buy a complete front axle corner assembly for a John Deere 310E or 310G backhoe?

Yes, Broken Tractor offers complete front corner assemblies in both a left hand (T251386-Corner) and right hand (T251385-Corner) version. They are listed for the 310E, 310SE, 315SE, 310G, 310SG and 315SG, with other models such as the 310D, 315D, 410D, 410E and 410G fitting by serial number. A corner assembly lets you replace the whole wheel end instead of rebuilding it piece by piece. We also carry the individual left and right steering swivels if you only need the housing.

What is the difference between the ZF loaded planetary assembly and the planetary kit for a John Deere 310SG?

We carry the front axle planetary as a loaded planetary assembly (L100168-Assy), as a planetary kit assembly (L100168-Kit) and as the planetary cover alone (L100168). Broken Tractor also sells the individual pieces, including the ring gear, pinion gear, sun shaft, snap rings and cover screws. On the 310SG, fitment for these parts depends on serial number, so match the part number on your existing parts or confirm with the parts team before ordering.

Do you carry left and right front axle drive shafts for John Deere 310 and 410 backhoes with ZF axles?

Yes, Broken Tractor offers a left front axle shaft assembly (AT167118) and a right hand front axle drive shaft kit (AT167119). Both are listed for the 310E, 310SE, 315SE, 410E and 410G, with models such as the 310D, 315D, 310G, 310SG, 315SG and 410D fitting by serial number. We also carry related parts including the drive shaft u-joint, outer u-joint fork, swivel housing seal and front axle shaft bearing.