New Holland Flat-Cover Style Planetary Hub (4WD)

Flat cover planetary assembly components for New Holland 4WD backhoe loaders, covering hubs, gears, bearings, covers, seals, and hardware for the front axle planetary system on E-series and LB-series machines.

Fits Models At A Glance

• E Series Backhoes: 555E, 575E, 655E, 675E
• LB Series Backhoes: LB75, LB90, LB90B, LB95, LB110, LB110B
• B Series Backhoes: B90, B95, B95LR, B95TC, B110B

Key Notes

• Application: Front axle planetary hub assembly on 4WD backhoe loaders using flat cover planetary style
• Components Available: Hub gears, ring gears, sun gears, planetary covers, retaining plates, snap rings, thrust washers, needle bearings, seals, studs, screws, drain plugs, and axle corner assemblies
• King Pin Style: Axle corner assemblies are 3-bolt king pin style - verify before ordering
• Used Parts: Front axle corners are used assemblies - inspect photos and descriptions carefully

Why Choose Broken Tractor

• ✅ Full planetary rebuild kits and individual components available
• ✅ Specialists in New Holland backhoe front axle drivetrain parts
• ✅ Fast shipping from Baton Rouge, LA and Kimbolton, OH

Frequently Asked Questions

What parts make up the flat cover front planetary on a New Holland 575E backhoe?

The flat cover planetary on New Holland 4WD backhoes like the 555E, 575E, 655E and 675E is built from a front hub, hub gear, ring gear, sun gear, planetary gears, needle bearings, thrust washers, a retaining plate and the planetary cover. Broken Tractor offers each of these individually, along with the hub seal, tapered roller bearing and race, snap rings, cover studs, cover screws, hub bolts and the drain plug. That lets you replace only the worn pieces instead of the whole hub.

Will the used front axle corner fit my New Holland 555E backhoe?

Yes. Our used front axle corners are listed for the New Holland 555E, 575E, 655E and 675E, in left side with stub shaft (FD-555E-LC) and right side (FD-555E-RC) versions. They are 3 bolt king pin style, so check that your axle uses the same king pin setup before ordering. These are used assemblies, so look over the photos and descriptions carefully.

Do New Holland LB75 and LB90 front planetary parts interchange with the 555E and 575E?

Many of them do. Most of the planetary components we carry, including the hub, hub gear, sun gear, planetary gears, needle bearing set, cover and hub seal, are listed for the 555E, 575E, 655E, 675E, LB75, B90, LB90, LB95 and LB110. Fitment can vary by part and serial number on later models like the LB90B, B95 and B110B, so match your old part number or call (800) 909-7060 to confirm.

Does the New Holland front planetary ring gear 9968069 fit a 555D or 575D backhoe?

Yes. Ring gear 9968069 is listed for the New Holland 555D, 575D, 655D and 675D as well as the 555E, 575E, 655E, 675E, LB75, B90, LB90, LB95 and LB110. For older Ford backhoes such as the 555C, 555D, 575D, 655C, 655D and 675D, we also carry the Ford / New Holland planetary hub gear N13513.

Can I rebuild a New Holland 4WD backhoe front planetary instead of replacing the whole axle corner?

Yes. Broken Tractor offers full planetary rebuild kits and every individual planetary component, so you can replace gears, bearings, washers, seals and hardware without buying a complete corner. If the hub housing or king pin area is too damaged to rebuild, a used axle corner is an option for the 555E, 575E, 655E and 675E.