Kobelco Excavator SK220, SK250, SK270 Pins & Links

Pins, bushings, links, seals, and O-rings for Kobelco SK220, SK250, and SK270 Series excavators, covering bucket linkage, dipper stick connections, and H-link assemblies across Series III, IV, and V generations. Several parts in this group also extend fitment to SK200 and SK210 Series machines.

Fits Models At A Glance

• SK220: SK220
• SK250: SK250
• SK270 Series: SK270 Series III, SK270 Series IV, SK270 Series V
• SK200/SK210 (select parts): SK200 Series III, SK200 Series IV, SK200 Series V, SK210

Key Notes

• Link Types: H-links, left-hand bucket links, and right-hand bucket links available individually or as a set
• Pin Applications: Bucket-to-dipper, link-to-dipper, and link-to-cylinder pin positions covered
• Bushing Coverage: H-link bushings and dipper-at-bucket bushings; one aftermarket bushing replaces two OEM pieces on H-link applications
• Seals & O-Rings: Hydraulic linkage seals and O-rings included; verify series generation before ordering
• Tooling: Steel bushing driver removal and installation tool available for service work

Why Choose Broken Tractor

• ✅ Kobelco excavator specialists with deep parts knowledge
• ✅ Accurate fitment data verified across Series III, IV, V
• ✅ Fast shipping from Baton Rouge, LA and Kimbolton, OH

Frequently Asked Questions

Do the bucket links fit the Kobelco SK270 Series III, IV and V?

Yes, the H-link (SKU 2406N1663F1), the left hand bucket link with bolt holes (SKU 2406P4903D1) and the right hand bucket link (SKU 2406P4903D2) are listed to fit the Kobelco SK220, SK250 and SK270 Series III, IV and V excavators. The links are available individually or as a set, so you can replace only the worn side or the full linkage.

Which pins does Broken Tractor carry for the Kobelco SK220 and SK250 bucket linkage?

We carry a bucket to dipper or link to dipper pin (SKU 2419T4684D1), a link to dipper pin (SKU 2419P3267D1) and a link to cylinder pin (SKU 2419P3266D1) for the Kobelco SK220, SK250 and SK270 Series III, IV and V. The link to cylinder pin also fits the SK200 Series III, IV and V and the SK210. Match the pin to its position on the machine and compare part numbers before ordering.

Does the aftermarket H-link bushing replace two OEM bushings on a Kobelco SK220?

Yes, the H-link bushing (SKU 2405T1263) replaces two OEM bushings with one piece on the Kobelco SK220, SK250 and SK270 Series III, IV and V. For the dipper end, we also offer a dipper to bucket bushing (SKU 2405T1293) and a dipper stick bushing (SKU B05T0041C2). The dipper stick bushing also fits SK200 Series III, IV and V and SK210 machines.

Which linkage seal fits a Kobelco SK200, SK210 or SK250 excavator?

The seal with SKU 2445R220D4 fits the Kobelco SK200 Series III, IV and V, SK210, SK220, SK250 and SK270 Series III, IV and V. A separate seal (SKU 2445R220D3-) is listed only for the SK200 Series III, IV and V and the SK210. Seal fitment depends on the series generation, so verify your model and series or call (800) 909-7060 to confirm before ordering.

What tool do I need to remove and install bushings on a Kobelco excavator?

Broken Tractor offers a steel bushing driver removal and installation tool (SKU BushingDriver) built for bushing service work. It is a universal fit tool, so it is not tied to one Kobelco model. It is useful when replacing H-link or dipper bushings on SK220, SK250 and SK270 machines.