Kobelco Excavator SK200 Series III, IV & V, SK210

Pins, bushings, links, and seals for Kobelco SK200 Series III, IV, and V and SK210 excavators, covering bucket-to-dipper arm pins, H-link assemblies, dipper stick bushings, bucket links, and related sealing components for the front attachment group.

Fits Models At A Glance

• SK200 Series: SK200 Series III, SK200 Series IV, SK200 Series V
• SK210 Series: SK210, SK210LC-6E

Key Notes

• Pin Coverage: Includes bucket-to-dipper arm, link-to-dipper arm, link-to-cylinder, and link-to-dipper pin positions
• Link Types: Left-hand and right-hand bucket links available with and without bolt holes; H-link assemblies also available
• Bushing Types: Dipper stick bushings, collared end bushings, lower H-link bushings, and open-end H-link bushings
• Sealing Components: O-rings and seals for multiple pin and bushing positions in the attachment group
• Extended Fitment: Select bushings and seals also fit SK220, SK250, and SK270 Series III–V machines

Why Choose Broken Tractor

• ✅ Kobelco excavator specialists with deep parts knowledge
• ✅ New and replacement parts available for aging SK fleets
• ✅ Fast shipping from Baton Rouge, LA and Kimbolton, OH

Frequently Asked Questions

Do Kobelco SK200 Series pins and links fit the SK210LC-6E excavator?

Not always. The SK210LC-6E uses its own front attachment parts, and Broken Tractor carries a dedicated bucket H-link (YN12B01849F1), right and left hand bucket links (YN12B01227P1-28P1), and a link to dipper pin (YN12B01717P1) for that model. Most SK200 Series III, IV and V parts list the SK210 but not the SK210LC-6E, so match the part number on your old part or confirm with our parts team before ordering. Call (800) 909-7060 if you are unsure which version your machine has.

What pins do I need for the bucket and H-link on a Kobelco SK200 Series III, IV or V?

We carry three main pin positions for the SK200 Series III, IV, V and SK210. These are the bucket to dipper arm or H-link pin (2419T3752), the link to dipper arm pin (2419P3381D1), and the link to cylinder pin (2419P3266D1). Compare the part number on your worn pin to make sure you order the correct position.

Do Kobelco SK200 bushings and seals also fit the SK220, SK250 and SK270?

Some do. The dipper stick bushing (B05T0041C2), the seal (2445R220D4) and the link to cylinder pin (2419P3266D1) also fit SK220, SK250 and SK270 Series III, IV and V excavators. The other bushings, links and seals we list here are for the SK200 Series III, IV, V and SK210 only, so check the fitment for each part number before ordering.

Which bucket link do I need for a Kobelco SK200 or SK210, left hand or right hand?

Bucket links are sold by side, so you need to match the side you are replacing. For the SK200 Series III, IV, V and SK210 we offer a left hand bucket link with bolt holes (2406P4823D1) and a right hand bucket link (2406P4823D2). Check whether your existing link has bolt holes and match the part number to be sure of a correct fit.

What bushings and seals are used in the H-link and dipper stick on a Kobelco SK200 or SK210?

For the H-link we carry a lower H-link bushing (2405T951) and an open-end H-link bushing (2405T1275). For the dipper stick we offer a dipper stick end collared bushing (2405T1274) and a dipper stick bushing (B05T0041C2), plus O-rings and seals such as 2445Z1136, 2445R220D3 and 2445R220D4 for multiple pin and bushing positions. We also carry a steel bushing driver tool for removing and installing bushings.