JD Backhoe Transmission Solenoids parts list
|
|
See Details
|
210LE, 310E, 310SE, 315SE, 310G, 310SG, 315SG, 410E, 410G, 710D, 710G, 710J, 710K, 710L |
Transmission Solenoid Valve |
|
AT179491 |
$164.00
|
View Info |
|
|
|
See Details
|
210G, 210P, 210K, 210K EP, 210L, 210L EP, 210LE, 210LJ, 310P, 310J, 310K, 310K EP, 310L, 310L EP, 310SJ, 310SK, 310SL, 310SL HL, 310TJ, 310TK TMC, 315P, 315J, 315SK, 315SL, 320P, 325J, 325SK, 325SL, 410P, 410J, 410K, 410L, 410TK TMC |
Transmission Solenoid Valve |
|
AT310584 |
$88.00
|
View Info |
|
|
|
See Details
|
210LE, 310E, 310SE, 315SE, 310G, 310SG, 315SG, 410E, 410G, 710D, 710G, 710J, 710K, 710L, 485E, 486E, 488E |
Transmission Solenoid |
|
AT177703 |
$138.00
|
View Info |
|
Your model does not appear on this page. You can search the entire site by using the search at the top of the window.
Transmission solenoid valves for John Deere backhoe loaders, covering hydraulic shift and control solenoids across 210, 310, 315, 320, 325, 410, and 710 series machines.
Fits Models At A Glance
- 210 Series: 210LE, 210G, 210P, 210K, 210K EP, 210L, 210L EP, 210LJ
- 310 Series: 310E, 310SE, 310G, 310SG, 310P, 310J, 310K, 310K EP, 310L, 310L EP, 310SJ, 310SK, 310SL, 310SL HL, 310TJ, 310TK TMC
- 315/320/325 Series: 315SE, 315SG, 315P, 315J, 315SK, 315SL, 320P, 325J, 325SK, 325SL
- 410 Series: 410E, 410G, 410P, 410J, 410K, 410L, 410TK TMC
- 710 Series: 710D, 710G, 710J, 710K, 710L
Key Notes
- Application: Controls transmission shifting and hydraulic flow within the powershift system
- Coverage: Multiple part numbers to match early E/G and later J/K/L generations
- Condition: New replacement solenoid valves available for direct fit
Why Choose Broken Tractor
- ✅ Deep backhoe transmission inventory across all series
- ✅ Fast shipping from two US locations
- ✅ Verified fitment by model and part number
Frequently Asked Questions
Which transmission solenoid fits a John Deere 310J backhoe?
The Transmission Hydraulic Solenoid Valve (SKU AT310584) fits the 310J along with many later J, K, and L generation machines including the 310K, 310L, 310SJ, 310SK, and 310SL. Earlier E and G series machines use a different solenoid, so match your model and part number before ordering. If you are unsure which generation your machine falls under, confirm with the parts team.
What is a John Deere backhoe transmission solenoid?
It is a hydraulic shift or control solenoid that directs oil flow within the powershift transmission to engage the correct gear or range. When the solenoid receives an electrical signal, it opens or closes a hydraulic passage to control shifting. Broken Tractor carries new replacement solenoid valves for direct fit across John Deere backhoe series.
Does one solenoid fit both early and late John Deere backhoes?
No, coverage is split by generation. Solenoids like SKU AT179491 and SKU AT177703 fit earlier E and G series machines such as the 310E, 310SE, 410E, and 710D, while SKU AT310584 covers later P, J, K, and L series machines. Match your model and the part number to get the correct fit.
What John Deere 710 backhoe models use these transmission solenoids?
The Transmission Solenoid Valve (SKU AT179491) and the Replacement Solenoid Valve (SKU AT177703) both fit the 710D, 710G, 710J, 710K, and 710L. Broken Tractor verifies fitment by model and part number, so confirm your specific model before ordering.
What are the signs of a bad transmission solenoid on a John Deere backhoe?
A failing transmission solenoid can cause hard or erratic shifting, failure to engage a gear or range, or loss of hydraulic flow within the powershift system. Because the solenoid controls oil flow to the transmission, electrical or hydraulic faults in the valve often show up as shifting problems. Replacing the solenoid with a new direct fit unit restores proper shift control.
