Hitachi EX150, EX160 Excavator Pins & Bushings

Pins, bushings, seals, and linkage components for Hitachi EX150 and EX160 excavators, covering bucket-to-dipper arm connections, H-link assemblies, dipper-at-link interfaces, and cylinder linkage points across standard and LC configurations.

Fits Models At A Glance

• EX150 Series: EX150, EX150S, EX150LC-5
• EX160 Series: EX160, EX160LC, EX160W, EX160LC-5

Key Notes

• Pin Types: Bucket-to-dipper arm, bucket-to-H-link, link-to-dipper, and link-to-cylinder pins available
• Bushing Types: Dipper at link, dipper at bucket, dipper link, and H-link end bushings
• Seal & O-Ring Coverage: Dipper at link seals, dipper at bucket seals, and associated O-rings included
• Linkage Components: Left and right hand bucket links with bolt holes, H-link assemblies, and dipper-to-cylinder links
• Tooling Available: Bushing driver removal and installation tool available for service use

Why Choose Broken Tractor

• ✅ Excavator linkage specialists serving dealers and contractors
• ✅ Accurate fitment data across EX150 and EX160 variants
• ✅ Fast shipping from Baton Rouge, LA and Kimbolton, OH

Frequently Asked Questions

What bucket pins fit a Hitachi EX150 and EX160 excavator?

For the bucket end of the linkage on the Hitachi EX150 and EX160, Broken Tractor carries the Bucket to Dipper Arm Pin (3041200) and the Bucket to H-Link Pin (3041201). Both pins are also listed for the Hitachi EX200. Replacing them along with the Dipper at Bucket Bushing (4196105) and Dipper at Bucket Seal (4067902) keeps the whole connection matched.

Is the link to dipper pin the same on a Hitachi EX150 and EX150LC-5?

No, the EX150 and EX150LC-5 use different link to dipper pins. Pin 3037281 is listed for the EX150, and pin 3036971 is listed for the EX150LC-5, EX160, EX160LC and EX200-1 through EX200-5. Several other linkage parts also split along these lines, so match your old part number or call (800) 909-7060 to confirm before ordering.

Which dipper at link bushing and seal fit a Hitachi EX160?

For the Hitachi EX160, EX160LC and EX150LC-5, we carry the Dipper Link Bushing (4196106) and the Dipper at Link Seal (4084578). The standard EX150 uses a different set, the Dipper at Link Bushing (4197536) and Dipper at Link Seal (4065687). Because fitment changes by model and version, compare the part number on your machine before you order.

Is there a shim and seal kit for a Hitachi EX150 or EX160 excavator?

Yes, Broken Tractor offers a Shim and Seal Kit (PV7001) listed for the Hitachi EX150, EX150S, EX160 and ZX160. We also carry individual seals and an O-ring (4089028) for the EX150 and EX160 if you only need to replace a single seal point.

Do you sell a tool for removing and installing excavator bushings?

Yes, we carry a steel Bushing Driver Removal and Installation Tool for service work. It is listed as universal, so it can be used on the Hitachi EX150 and EX160 when you are pressing out worn bushings and installing new ones in the bucket and dipper linkage.