Ford/NH Swivel Housing & Steering – Top Hat Cover

Swivel housings, king pins, steering cylinders, tie rod ends, and related front axle steering components for Ford and New Holland 4WD backhoe loaders equipped with Carraro front axles. Parts cover both left-hand and right-hand swivel housings, upper and lower king pin assemblies, bronze-bushed housing components, power steering cylinders, and all associated hardware for complete steering axle rebuilds.

Fits Models At A Glance

• E Series (Ford/New Holland): 555E, 575E, 655E, 675E
• LB/B Series: LB75, LB75B, B90, B90B, LB90, LB90B, B95B, LB95, LB95B, LB110, B110B

Key Notes

• Axle Type: Carraro 4WD front axle - verify axle make before ordering
• King Pin Styles: Both 4-bolt and 3-bolt king pin configurations available
• Swivel Housings: Left-hand and right-hand housings sold separately or as a kit
• Hardware Included: Jam nuts, grease fittings, bolts, and seals available individually
• Steering Cylinder: Full cylinder assembly and rebuild kit options both available

Why Choose Broken Tractor

• ✅ New Holland and Case fitment expertise across generations
• ✅ Individual components or full rebuild kits available
• ✅ Fast shipping from Baton Rouge, LA and Kimbolton, OH

Frequently Asked Questions

Do I need a 4-bolt or 3-bolt king pin on a New Holland 555E or LB75B backhoe?

It depends on how your Carraro front axle is built. Broken Tractor carries parts for both styles on the same Ford and New Holland models. For 4-bolt axles we offer the 4-bolt King Pin Kit (CA-2616-KPK1) and 4-bolt Upper King Pin (85805980). For 3-bolt axles we offer the Front Axle Steering Arm (87306934). Count the bolts on your existing king pin cap before ordering, or call (800) 909-7060 if you are unsure.

Are left-hand and right-hand swivel housings different on a New Holland backhoe?

Yes, the left-hand and right-hand swivel housings are separate parts and are not interchangeable. We carry left-hand housings such as 85805981 and 85827740, and right-hand housings including 47573503, 85824348, 85827739 and 85805985 for the 555E, 575E, 655E, 675E and LB/B Series. Because there are several part numbers for each side, match the number on your old housing and confirm your machine has a Carraro front axle.

Do you carry king pins for older Ford 555C, 555D and 575D backhoes?

Yes, Broken Tractor carries king pins for earlier Ford backhoes with Carraro 4WD front axles. The Upper King Pin (N14376) fits models including the 555, 555A, 555B, 555C, 555D, 575D and 655 series. The three-bolt Lower King Pin (N13504) covers those models plus the 655D and 675D. Fitment can vary by serial number, so compare the part number to your original before ordering.

Can I rebuild the power steering cylinder on a New Holland LB90 backhoe instead of replacing it?

Yes, you can either rebuild the cylinder or replace the whole unit. We offer the Steering Cylinder Kit (85805990) for rebuilds and the complete Power Steering Cylinder (85805978) as a full replacement. Both fit the 555E, 575E, 655E, 675E, LB75, LB90, LB95, LB110 and related B Series models. A matching 4WD Steering Cylinder Bolt (9968028) is also available.

What other parts should I get when replacing a swivel housing on a New Holland 4WD backhoe?

Broken Tractor sells the supporting parts individually, so you can replace worn pieces along with the housing. Options include the bronze Swivel Housing Bushing with oil groove (85805988), the Drive Shaft Oil Seal (100529A1) and the Swivel Housing Jam Nut (87313789). We also carry King Pin Bolts (85805979) and the Lower King Pin Grease Fitting (85805984). Tie rod ends, ball joints and steering arms are also offered to finish a complete steering axle rebuild.