Case Skid Steer Hydraulic Cylinder & Kit

Replacement hydraulic cylinders and seal kits for Case skid steer loaders, covering lift, tilt, and bucket cylinders plus complete rebuild kits across multiple series of machines.

Fits Models At A Glance

• 1800 Series: 1835B, 1835C, 1840, 1845C
• 40XT Series: 40XT, 60XT, 70XT, 75XT, 90XT, 95XT
• 400 Series: 410, 420, 430, 440, 450, 465
• Alpha Series: SR130, SR150, SR175, SR200, SR220, SV185, SV250, SV300

Key Notes

• Application: Lift, tilt, and bucket cylinder assemblies and seal kits
• Condition: New and remanufactured cylinders available
• Kit Contents: Seals, O-rings, and wear rings for full rebuilds
• Fitment: Verify bore, rod, and stroke against your machine

Why Choose Broken Tractor

• ✅ Fast shipping from two US warehouses
• ✅ Fitment help from equipment parts specialists
• ✅ Wide coverage across Case skid steer models

Frequently Asked Questions

What is included in a Case skid steer hydraulic cylinder repair kit?

Our Case skid steer seal kits include the seals, O-rings, and wear rings needed for a full cylinder rebuild. These kits let you reseal a leaking lift, tilt, or bucket cylinder without replacing the entire assembly. Match the kit to your specific cylinder by bore, rod, and stroke to be sure you get the correct seals.

How do I find the right hydraulic cylinder seal kit by size?

Seal kits are matched by cylinder bore, rod diameter, and stroke, so measure those against your machine before ordering. Because fitment can vary across Case skid steer series like the 1800, 40XT, 400, and Alpha models, matching the part number is the most reliable method. Our parts specialists can help confirm the right kit for your cylinder.

Should I rebuild or replace a Case skid steer hydraulic cylinder?

If the cylinder barrel and rod are in good shape, a seal kit rebuild usually restores it at a lower cost. If the rod is scored, bent, or the barrel is damaged, a new or remanufactured cylinder assembly is the better choice. Broken Tractor carries both seal kits and complete cylinders for Case skid steer loaders.

What does a hydraulic cylinder do on a Case skid steer?

Hydraulic cylinders convert fluid pressure into linear motion to raise the loader arms, tilt the bucket, and curl or dump attachments. Case skid steers use lift, tilt, and bucket cylinders, each rated for a specific bore, rod, and stroke. When seals wear out the cylinder drifts or leaks, which is when a rebuild kit or replacement cylinder is needed.

Which Case skid steer models do your hydraulic cylinders and kits fit?

We carry cylinders and seal kits covering the 1800 Series (1835B, 1835C, 1840, 1845C), 40XT Series (40XT, 60XT, 70XT, 75XT, 90XT, 95XT), 400 Series (410, 420, 430, 440, 450, 465), and Alpha Series (SR130, SR150, SR175, SR200, SR220, SV185, SV250, SV300). Fitment can depend on serial number and cylinder type, so verify bore, rod, and stroke or confirm the part number with our parts team at (800) 909-7060.