Case 580K & 580 Super K Bucket Parts

Backhoe bucket pins, bushings, links, teeth, and quick coupler components for Case 580K and 580 Super K backhoe loaders, covering bucket-to-dipper connections, Y-links, curved bucket links, spacer bushings, snap rings, washers, and bolt-on tooth and shank kits.

Fits Models At A Glance

• 580K Series: 580K, 580K Phase I, 580K Phase III
• 580 Super K Series: 580 Super K

Key Notes

• Application: Bucket linkage, quick coupler, and tooth wear parts for the rear backhoe bucket.
• Components: Bucket pins, bushings, Y-links, curved bucket links, spacer bushings, snap rings, and pin washers.
• Ground Engaging: General purpose teeth, tiger and fang style teeth, shank adapters, and retainer pins.
• Pin Sizing: Snap rings and washers available for 1-1/2, 1-3/4, and 2 inch pins.
• Service: New and used links available along with a bushing driver install tool.

Why Choose Broken Tractor

• ✅ New and used Case bucket parts in one place
• ✅ Fitment help from real backhoe specialists
• ✅ Fast shipping from two US locations

Frequently Asked Questions

What bucket pins fit a Case 580K backhoe?

We carry several bucket pins for the 580K and 580 Super K, including dipper stick to bucket pins, bucket to link or coupler pins, and Y-link to quick coupler pins. Because pin diameters vary by location, match the part number or measure your existing pin before ordering. Call our parts team at (800) 909-7060 if you need help confirming the right one.

What is the difference between the curved bucket link and the Y-link on a 580 Super K?

The curved bucket link and the Y-link connect the dipper stick, bucket, and quick coupler in different positions of the linkage. Both are available for the 580K and 580 Super K, in new and used condition depending on availability. Confirm which link your machine uses by matching the part number.

Do you sell bucket teeth for the Case 580K?

Yes, we offer general purpose teeth, tiger style teeth, and fang style teeth for Case 580K and 580 Super K backhoe buckets, along with retainer pins and weld-on shank adapters. We also carry a combined tooth, pin, and shank kit.

Which snap ring do I need for my bucket pin?

Snap rings are sized to the pin diameter, so we stock rings for 1-1/2 inch, 1-3/4 inch, and 2 inch pins on Case 580K and 580 Super K backhoes. Measure the pin or match the part number to pick the correct ring.