Case 580M Pin Kits

Backhoe and loader pin kits for Case 580M and 580 Super M backhoe loaders, covering bucket, dipper, boom, swing tower, stabilizer, and loader frame connection points with matched pins, bushings, and hardware.

Fits Models At A Glance

• 580M Series: 580M, 580 Super M, 580 Super M+
• Shared Fitment: Select kits also fit 580L, 580 Super L, 580K, and 580 Super K

Key Notes

• Application: Rebuilds worn backhoe and loader pivot joints across the machine
• Coverage: Bucket to dipper, boom to swing tower, swing frame to chassis, and stabilizer points
• Kit contents: Pins with matching bushings and hardware for a complete joint rebuild
• Loader side: Frame to chassis, lift cylinder, and bucket cylinder pin kits
• Service tool: A universal steel bushing driver is available for installation

Why Choose Broken Tractor

• ✅ Kits matched to Case 580M joint locations
• ✅ Pins and bushings supplied together for full rebuilds
• ✅ Fast shipping from two US warehouses

Frequently Asked Questions

What pin kits fit a Case 580M?

We carry pin kits for the 580M and 580 Super M covering bucket to dipper, boom to dipper, boom to swing tower, swing frame to chassis, stabilizer, and loader frame joints. Each kit is named for the specific joint it rebuilds. Match the kit to the worn pivot point on your machine.

Do these pin kits include bushings?

Most Case 580M pin kits include the matching pins, bushings, and hardware needed to rebuild a joint. Some listings are bushing only kits for specific locations. Check the individual product to confirm what is included before ordering.

How do I know which pin kit I need for my 580M?

Identify the worn joint by location, then choose the kit named for that connection such as bucket cylinder to dipper or swing frame to chassis. Fitment can vary by serial number and standard versus extendable dipper. Confirm with the part number or call our parts team at (800) 909-7060.

Will a 580 Super M pin kit fit a standard 580M?

Many kits are listed as fitting both 580M and 580 Super M, but some joints differ between standard and Super machines and between standard and extendahoe dippers. Compare the fitment on the specific kit to your machine before ordering.