480C, 480D, 480E, 480F, 580C, 580D, 580E, 580SE

Two-wheel drive front axle parts for Case 480C, 480D, 480E, 480F, 580C, 580D, 580E, and 580SE backhoe loaders - covering spindles, king pins, tie rods, steering cylinders, wheel hubs, bearings, and complete rebuilt axle assemblies for these classic Case machines.

Fits Models At A Glance

• 480 Series: 480C, 480D, 480E, 480E LL, 480F, 480F LL
• 580C/D Series: 580C, 580D, 580 Super D
• 580E Series: 580E, 580 Super E, 580SE

Key Notes

• Application: Two-wheel drive front axle systems only - confirm 2WD configuration before ordering
• King Pin Components: King pin kits, needle bearings, and O-rings are available individually or as assemblies
• Steering Components: Tie rod ends, tubes, clamps, and complete tie rod assembly kits available for the full axle rebuild
• Axle Ends: Weld-on replacement axle ends available in left-hand and right-hand versions
• Rebuilt Axles: Complete rebuilt 2WD front axle assemblies available as a drop-in replacement option

Why Choose Broken Tractor

• ✅ Deep Case backhoe parts inventory across axle generations
• ✅ Fast shipping from Baton Rouge, LA and Kimbolton, OH
• ✅ Specialists in vintage and current Case machine fitment

Replacement filters for the Case 590 Super L backhoe loader, covering engine air, fuel, hydraulic, transmission, cab air, and oil filtration across Series I and Series II configurations. Sourced to match original Case specifications and compatible with the full 590 Super L production run.

Frequently Asked Questions

Can I rebuild the king pins on a Case 580 two-wheel drive front axle instead of replacing the axle?

Yes, Broken Tractor carries the individual parts for a king pin rebuild on Case 480C through 580 Super E two-wheel drive front axles. That includes the king pin kit (D103156), king pins (D72337), needle bearings that replace upper or lower (A28230), king pin O-rings (271624 and A23904), the king pin lock pin (D57486) and a 45 degree grease fitting (219-89). Fitment varies by model, so match the part number on each listing to your machine before ordering.

Is there a rebuilt two-wheel drive front axle for the Case 580E backhoe?

Yes, we offer a complete rebuilt two-wheel drive front axle (DC580EFA) that fits the Case 480C, 480D, 480E, 580C, 580D, 580E and 580 Super E. We also carry a reman front axle beam with king pin kits (D67317) for the same models. These parts are for two-wheel drive front axles only, so confirm your machine's drive configuration before ordering.

Which front axle spindle fits a Case 580D backhoe?

Spindle fitment depends on the model and axle, so the Case 580D has more than one possible match. Spindles D86343 and D86344 are for machines with steel axles and fit the 480C, 480D, 480E, 580C, 580D, 580 Super D, 580E and 580 Super E. Spindle D125863 fits the 480E, 480F, 580D, 580 Super D, 580E and 580 Super E. Match the part number on your existing spindle and check left hand versus right hand, or call (800) 909-7060 to confirm with the parts team.

What tie rod parts fit a Case 480E or 580C backhoe?

Broken Tractor carries a complete tie rod assembly kit (D73397KIT) that fits the Case 480C, 480D, 480E, 480E LL, 480F, 480F LL, 580C, 580D, 580 Super D, 580E and 580 Super E. If you only need individual parts, we also carry tie rod ends (D88491 and D88492), the steering tie rod tube (D73397) and tie rod clamps (A27080 and D73799). Check each part number against your model, because fitment is not identical across every piece.

Which power steering cylinder fits a Case 580C backhoe?

Steering cylinder assembly 234447A1 fits the Case 480C, 480D, 480E, 580C, 580D, 580 Super D, 580E and 580 Super E. For the cylinder ends, we carry the power steering cylinder swivel joint (A40962) and a power steering cylinder end kit (A40962-TK) that fit the 480C through 480F and 580C through 580 Super E. A separate power steering cylinder labeled for four-wheel drive (234449A1) fits the 480E, 480F, 580E and 580 Super E, so confirm whether your machine is two-wheel or four-wheel drive before ordering.