Serial Number Information
The serial number plate for the New Holland W190B is typically located on the right side of the frame near the articulation pivot or on a metal tag near the cab entry step. Use your serial number to verify:
-
Engine variant and emissions setup
-
Transmission model (power shift, countershaft)
-
Year of manufacture for accurate part selection
-
Loader arm and bucket configuration
Key Specifications
| Feature |
Specification |
| Engine |
New Holland 667TA/E3, 6-cylinder turbocharged diesel |
| Cooling |
Air-to-air aftercooled |
| Net Power |
195 HP (145.5 kW) @ 2,000 RPM |
| Operating Weight |
39,074 lbs (17,723.7 kg) |
| Bucket Capacity (Heaped) |
4.5 yd³ (3.44 m³) |
| Breakout Force |
34,785 lbs (154.7 kN) |
| Transmission |
Power shift, countershaft; 4F / 3R gears |
| Max Forward Speed |
24 mph (38.7 km/h) |
| Hydraulic Flow |
45.2 GPM (171.2 L/min) |
| Tire Size |
23.5x25 L3 Bias Ply |
Performance
| Feature |
Specification |
| Loader Class |
Heavy-duty wheel loader |
| Z-Bar Linkage |
Yes, for maximum breakout and digging power |
| Drive Type |
4WD with limited slip differential (model dependent) |
| Application |
Bulk material loading, aggregates, industrial use |
Key Features
Proven New Holland Power
The 667TA/E3 6-cylinder turbo diesel engine delivers 195 HP with air-to-air aftercooling for fuel-efficient, high-output performance in tough working environments.
Power Shift Transmission
Equipped with a countershaft power shift transmission, the W190B offers 4 forward and 3 reverse speeds, allowing for optimal power transfer and smooth gear changes under heavy loads.
High-Capacity Hydraulics
The 45.2 GPM hydraulic system provides fast bucket cycle times, enabling higher productivity for loading trucks, feeding crushers, or handling stockpiles.
Operator-Centric Design
-
Spacious ROPS cab with ergonomic controls
-
Wide, clear sightlines for enhanced safety and visibility
-
Suspension seat and multi-lever or joystick configuration (model dependent)
Common Replacement Parts
Get rugged parts for your New Holland W190B at Broken Tractor:
Engine & Cooling
-
Turbochargers, air filters, injectors, water pumps, radiator cores
Transmission & Driveline
Hydraulic Components
Loader Assembly
Electrical & Cab
-
Joystick controllers, seat kits, gauges, ignition switches, light assemblies
Maintenance Schedule
| Task |
Recommended Interval |
| Engine Oil & Filter |
Every 250 hours |
| Transmission Oil & Filter |
Every 500 hours |
| Hydraulic Filter & Fluid |
Every 500 hours |
| Fuel Filter Service |
Every 250 hours |
| Air Filter Cleaning |
100–250 hours |
| Bucket Pins & Linkage Grease |
Daily or every shift |
