Serial Number Information
The serial number for the New Holland F156.7A motor grader is typically found on the main frame near the articulation joint or behind the front left tire on the chassis. Use your serial number to verify:
-
Engine compatibility (FPT NEF, Tier 3)
-
Hydraulic system specifications
-
Transmission model
-
Year and blade configuration
Key Specifications
| Feature |
Specification |
| Engine Model |
FPT NEF, 6-cylinder turbocharged diesel |
| Emissions Compliance |
Tier 3 |
| Net Power |
195 HP (145 kW) @ 2,200 RPM |
| Operating Weight |
34,390 lbs (15,600 kg) |
| Blade Length |
14 ft (4.27 m) |
| Max Blade Lift Above Ground |
18.1 in (460 mm) |
| Max Blade Drop Below Ground |
27.6 in (700 mm) |
| Hydraulic Flow |
35 GPM (132 L/min) |
| Transmission |
Powershift, 6 forward / 3 reverse speeds |
| Turning Radius |
23 ft 11 in (7.3 m) |
| Travel Speed (Fwd/Rev) |
27 mph (43 km/h) / 16 mph (25 km/h) |
Performance
| Feature |
Specification |
| Frame Type |
Articulated |
| Blade Control |
Hydraulic, multi-position |
| Drive System |
Rear-wheel or all-wheel options |
| Grading Applications |
Road maintenance, ditching, site leveling |
Key Features
FPT Turbocharged Power
Equipped with a Tier 3-compliant FPT NEF engine, the F156.7A produces 195 HP, offering powerful and reliable performance in demanding grading conditions.
Heavy-Duty Blade Control
A 14-foot blade delivers high-precision grading with 18.1 inches of lift and 27.6 inches of drop, allowing for contour grading, trenching, and berm shaping with ease.
Powershift Transmission
The 6 forward and 3 reverse gears offer smooth operation and fast repositioning—up to 27 mph forward, making this machine ideal for large-scale jobs or road networks.
Tight Turning Radius
With an articulated frame and 23 ft 11 in turning radius, the F156.7A is maneuverable enough for urban grading while still performing in open terrain.
Common Replacement Parts
Get dependable parts for the New Holland F156.7A motor grader at Broken Tractor:
Engine & Cooling
Transmission & Drivetrain
Hydraulic System
Blade & Frame
Cab & Electrical
Maintenance Schedule
| Task |
Recommended Interval |
| Engine Oil & Filter |
Every 250 hours |
| Hydraulic Oil & Filter |
Every 500 hours |
| Transmission Service |
Every 600 hours |
| Fuel Filter Replacement |
Every 250 hours |
| Air Filter Service |
100–250 hours depending on conditions |
| Grease Blade Pivot Points |
Daily or as needed |
