Serial Number Location
The serial number plate is located on the left side of the loader frame under the lift arm, just below the operator's cab. Use this serial number when selecting replacement parts for precise compatibility.
Key Specifications
| Feature |
Specification |
| Operating Weight |
8,615 lbs (3,908 kg) |
| Engine |
Bobcat 2.4L Tier 4 Diesel |
| Horsepower |
74 HP (55.2 kW) |
| Rated Operating Capacity |
2,900 lbs (1,315 kg) |
| Tipping Load |
5,800 lbs (2,631 kg) |
| Travel Speed (Std / 2-Speed) |
7.1 mph / 11.4 mph |
| Fuel Capacity |
28.3 gallons (107 L) |
Hydraulic System
| Feature |
Standard Flow |
High Flow (Optional) |
| Flow Capacity |
17.6 GPM (66.6 L/min) |
26.9 GPM (101.8 L/min) |
| System Pressure |
3,500 psi (24.1 MPa) |
3,500 psi (24.1 MPa) |
Dimensions
| Measurement |
Value |
| Length with Bucket |
11.9 ft (3.63 m) |
| Width Over Tires |
5.8 ft (1.76 m) |
| Height to Cab |
6.8 ft (2.08 m) |
| Wheelbase |
4.0 ft (1.22 m) |
| Ground Clearance |
8.3 in (211 mm) |
Features & Control Options
-
R-Series Cab: Redesigned cab with enhanced visibility and sealed environment
-
Smart Attachments Ready: Compatible with Bobcat’s intelligent hydraulic attachments
-
Selectable Joystick Control (Optional): Hands-only operation with customizable response settings
-
Hydraulic Coupler: Quick attachment switching from the cab
Maintenance & Common Issues
Regular Maintenance
-
Engine Oil and Fuel Filters – Every 250 hours
-
Hydraulic Filter and Fluid – Every 500 hours
-
DPF System Check (Tier 4) – Monitor regeneration intervals
-
Grease Points and Loader Arm Pins – Daily lubrication
Common Issues & Fixes
-
DPF Warning or Regen Errors – Perform manual regen or check sensors – engine parts available
-
Hydraulic Coupler Leaks – Replace worn O-rings or hoses – shop hydraulic kits
-
Joystick or Control Lag – Calibrate or replace SJC module if equipped
