The Bobcat 610 Skid Steer Loader is a vintage, dependable workhorse from the 1970s and 1980s lineup, known for its rugged build and simplicity. Powered by a robust gasoline engine and featuring a manual lever-operated transmission, the 610 remains a popular choice among vintage equipment enthusiasts, farmers, and small contractors due to its ease of maintenance and ready availability of parts.
Specifications & Features:
-
Engine: Wisconsin VH4D, 4-cylinder air-cooled gasoline engine
-
Engine Power: Approx. 30 hp
-
Hydraulic Pressure: 1,500 psi
-
Pump Flow: 10 GPM
-
Rated Operating Capacity: 1,200 lbs
-
Operating Weight: Approx. 4,000 lbs
-
Lift Type: Radial lift
-
Transmission: Chain drive, clutch/brake steering
-
Travel Speed: Up to 6.5 mph
-
Tires: 7.00x15 standard
Common Maintenance Needs:
-
Hydraulic cylinder seal kits: A frequent fix for aged lift/tilt cylinders – Shop Bobcat 610 Hydraulic Kits
-
Wisconsin VH4D parts: Tune-up kits, starters, and carburetors – Find Wisconsin Engine Parts
-
Chain drive components: Sprockets, chains, and tensioners wear over time
-
Steering clutch/brake parts: Require periodic adjustment or replacement
Common Issues & Quick Fixes:
-
Engine won’t start: Check ignition coil, plugs, or rebuild carb
-
Hydraulic arm drift or leak: Rebuild lift and tilt cylinders with new seals
-
Brake/clutch issues: Re-tension linkages or replace worn pads
-
Chain case oil leaks: Replace chain case gaskets or input shaft seals
Pro Tips:
-
Always grease all fittings after 8–10 hours of use to reduce pin/bushing wear
-
Maintain correct belt tension for the engine cooling fan
-
Use SAE 30 non-detergent oil for VH4D engine longevity
-
Store in a covered area to protect electrical components and hydraulic hoses
Serial Number Location:
The serial number plate is typically located on the loader frame near the engine compartment or under the operator seat platform.
