Description:
Serial Number Information
The serial number plate for the Takeuchi TB260 is typically found on the front right side of the frame below the cab or near the boom swing post. Use your serial number to verify:
-
Engine compliance (Tier 4 Final - Yanmar 4TNV86CT)
-
Hydraulic configuration
-
Track and undercarriage parts
-
Production year for part matching
Key Specifications
Feature |
Specification |
Engine |
Yanmar 4TNV86CT, 4-cylinder turbocharged diesel |
Emissions |
Tier 4 Final |
Net Power |
47.6 HP (35.5 kW) @ 2,400 RPM |
Operating Weight |
12,125 lbs (5,500 kg) |
Bucket Capacity |
0.14 – 0.24 yd³ |
Max Dig Depth |
12 ft 9.4 in (3.9 m) |
Max Ground Reach |
20 ft 4.7 in (6.2 m) |
Auxiliary Hydraulic Flow |
24.2 GPM (91.6 L/min) |
Travel Speed (High/Low) |
3.1 / 1.6 mph (5.0 / 2.5 km/h) |
Swing Speed |
9.5 RPM |
Performance
Feature |
Specification |
Machine Class |
6-ton mini excavator |
Digging System |
Mono boom with thumb-ready hydraulics |
Undercarriage |
Steel or rubber tracks |
Attachments Supported |
Buckets, breakers, augers, compactors |
Key Features
Tier 4 Final Yanmar Power
The 4TNV86CT turbocharged engine delivers 47.6 HP, offering low emissions and reliable output for high-efficiency trenching, grading, and light demolition work.
Impressive Reach and Capacity
With a dig depth of nearly 13 feet and ground reach over 20 feet, the TB260 provides excellent coverage for site prep, utilities, and excavation.
Hydraulic Performance
The 24.2 GPM auxiliary flow supports a wide range of demanding attachments with fast cycle times and smooth responsiveness.
Jobsite Maneuverability
Compact and powerful, the TB260 balances 12,125 lbs of operating weight with the agility needed to work in tight urban and residential zones.
Common Replacement Parts
Order durable, OEM and aftermarket parts for your Takeuchi TB260 at Broken Tractor:
Engine Components
-
Injectors, air filters, turbochargers, thermostats, oil coolers
Hydraulics
Undercarriage
-
Rubber tracks, rollers, idlers, sprockets, tensioners
Swing & Travel
Cab & Controls
Maintenance Schedule
Task |
Recommended Interval |
Engine Oil & Filter |
Every 250 hours |
Hydraulic Oil & Filter |
Every 500 hours |
Fuel Filter Service |
Every 250 hours |
Air Filter Cleaning |
100–250 hours (dust conditions) |
Grease Boom, Arm & Bucket Joints |
Daily or every shift |
Track Tension Check |
Weekly or as needed |