Description:
Serial Number Location
The serial number for the JCB 217S is typically:
-
Found on a metal plate mounted on the left side of the machine near the loader arm pivot
-
May also be stamped near the right-hand frame rail behind the front tire
-
Engine serial numbers on the JCB DieselMax are usually located on a flat pad at the rear left of the engine block
Key Specifications
Feature |
Specification |
Engine |
JCB DieselMax, 6-cylinder diesel |
Net Horsepower |
100 HP (74.6 kW) @ 2,200 RPM |
Operating Weight |
16,865 lbs (7,650 kg) |
Loader Bucket Capacity |
1.5 cubic yards |
Backhoe Max Dig Depth |
15 ft 6 in (4.72 m) |
Max Reach at Ground Level |
22 ft 2 in (6.76 m) |
Hydraulic Flow Rate |
37 GPM (140 L/min) |
Transmission |
Synchro Shuttle, 4F/4R speeds |
Max Travel Speed |
25 mph (40 km/h) |
Key Features
High-Performance Diesel Engine
Powered by the 6-cylinder JCB DieselMax, the 217S delivers smooth, reliable 100 HP output for demanding excavation and material handling jobs.
Heavy-Duty Backhoe Capabilities
With a 15 ft 6 in dig depth and over 22 ft ground reach, the 217S is ideal for deep trenching and large-scale site prep.
High-Flow Hydraulics
A 37 GPM hydraulic flow rate supports powerful lift and rapid cycle times—great for attachments and precision backhoe work.
Synchro Shuttle Transmission
The 4-speed synchro shuttle transmission ensures efficient direction changes, improving productivity during repeated loader and backhoe tasks.
Common Replacement Parts
Maintain your JCB 217S with premium replacement components available at Broken Tractor:
Engine Components
Injectors, fuel pumps, turbochargers, water pumps, head gaskets
Hydraulic System
Main pumps, loader/backhoe cylinders, hoses, spools, high-flow couplers
Transmission & Drivetrain
Clutch kits, shift linkages, shuttle packs, axle seals, bearings
Loader & Backhoe Assemblies
Pins, bushings, quick couplers, bucket tilt cylinders, stabilizer pads
Cooling & Electrical
Radiators, fans, ignition switches, control modules, cab wiring harnesses
Maintenance Schedule
Task |
Recommended Interval |
Engine Oil & Filter |
Every 100 hours |
Hydraulic Filter Replacement |
Every 250 hours |
Transmission Fluid Check |
Every 100 hours |
Fuel System Maintenance |
Every 200 hours |
Grease Loader & Backhoe Pins |
Daily or before heavy use |
Cooling System Flush |
Annually or every 1,000 hours |