International Harvester 100E Crawler Loader

The International Harvester 100E Crawler Loader is a heavy-duty, track-type loader built for power and stability. As a successor to the 100C, the 100E features significant upgrades in engine performance and hydraulic capabilities. Designed for construction, excavation, and land clearing, the 100E remains a reliable workhorse in the field.

Engine & Powertrain:

• Engine: IH D239 4-cylinder diesel engine (upgraded tuning over 100C)

• Displacement: 239 cu in (3.9 L)

• Gross Power: Up to 70 hp

• Cooling System: Liquid-cooled

• Transmission: 5-speed manual with dry disc clutch

• Top Speed: Approx. 6.5 mph forward

Hydraulics:

• System Type: Open center

• Pump Flow: ~17–18 GPM

• System Pressure: 2,000 PSI

• Hydraulic Controls: Dual-lever joystick system with improved loader control response

Dimensions & Operating Data:

• Operating Weight: ~13,200 lbs

• Bucket Capacity: 1–1.25 cubic yards

• Overall Length: ~148 in

• Height to Cab: 104 in

• Track Gauge: 52 in

• Ground Clearance: 13.5 in

Maintenance Essentials:

• Routine Needs:

  • Hydraulic oil and filters

  • Fuel filters and injectors

  • Loader arm pins and bushings

• Common Repairs:

  • Brake slippage or failure: Replace with IH 100E brake kits

  • Hydraulic leaks at cylinders: Use Hydraulic Cylinder Seal Kits for IH 100E

  • Clutch drag or wear: Install IH 100E clutch rebuild kits

Pro Tips:

• Always bleed air from the hydraulic lines after replacing seals or hoses

• Use OEM-grade track adjusters for proper alignment

• Grease pivot pins every 8 operating hours

Serial Number Location:
Located near the left side of the operator seat, stamped into the frame above the final drive case.

Parts & Support:
From loader pins and bushings to complete hydraulic kits, BrokenTractor.com offers a full range of IH 100E parts to support your rebuild or service project.