Case TV370B Track Loader – Parts, Specs

Description:

Serial Number Location

The serial number plate is located on the right-hand side of the lower track frame, near the rear final-drive housing. Always verify it before ordering parts to ensure accurate fitment.

Key Specifications

• Model Years: 2025 – Present

• Engine: 7.6 L, 6-cylinder diesel, Tier 4 Final

• Net Power: 370 hp @ 2,400 rpm

• Operating Weight: 58,000 lb (with full fuel and standard bucket)

• Rated Operating Capacity: 22,500 lb

• Tipping Load: 45,000 lb

• Bucket Breakout Force: 72,000 lb

• Lift Height (to bucket hinge pin): 14 ft 2 in

• Ground Speed: Up to 12 mph (two-speed travel)

• Ground Pressure: 10.7 psi

• Track Width: 18 in

• Track Length on Ground: 12 ft 0 in

• Overall Width (with bucket): 9 ft 6 in

• Cab Height: 10 ft 2 in

• Fuel Tank Capacity: 85 gallons

• Hydraulic System Capacity: 90 gallons

• Auxiliary Hydraulic Flow: 75 gpm

• Hydraulic Operating Pressure: 5,200 psi

Performance & Design Highlights

• Extreme-Class Strength: 22,500 lb rated capacity with 72,000 lb breakout force for heavy-duty applications

• Ultra-High-Flow Hydraulics: 75 gpm flow-sharing pump provides robust attachment power

• Premium Cab: ROPS/FOPS-certified with heated air-ride seat, full automatic HVAC, panoramic visibility, and rear camera

• Two-Speed Travel: 12 mph max travel; low-speed mode for precise control under load

• Reinforced Undercarriage: Heavy-duty track rollers and robust track frames engineered for tough environments

Routine Maintenance

• Engine Oil & Filter: Service every 500 hours

• Hydraulic Fluid & Filters: Change hydraulic fluid every 1,000 hours; filters every 500 hours

• Fuel Filter: Replace every 500 hours

• Air Filter: Inspect every 250 hours; replace as needed

• Track Tension & Undercarriage: Inspect and lubricate daily

• Cooling System: Clean radiator and cooler cores weekly; check coolant levels

Common Issues & Fixes

• Track Wear or Misalignment: Check tension, rollers, and sprockets daily; replace worn parts promptly

• Hydraulic Hose Wear: Inspect hoses regularly; replace any showing abrasion or leakage

• Overheating: Keep coolers and radiator clear of debris; verify coolant remains within specification

• Electrical or Sensor Alerts: Use onboard diagnostics to inspect wiring, fuses, and sensors

• Breakout Force Decline: Replace worn bucket teeth and maintain clean hydraulic fluid and filters