Ford 655D Backhoe Loader – Parts, Specs & Serial Number Guide

Description:

The Ford 655D Backhoe Loader is a full-sized industrial loader/backhoe built for tough jobs that require superior digging depth, high hydraulic power, and rugged reliability. Designed with a 4.2L diesel engine and high-capacity hydraulic system, the 655D offers excellent versatility for trenching, grading, and material handling.

This guide provides detailed specs, maintenance tips, and solutions to common issues—along with direct links to replacement parts from BrokenTractor.com.

Engine Specifications

• Make/Model: Ford 4.2L 4-cylinder diesel

• Horsepower: Approx. 82 hp

• Displacement: 256 cu in (4.2 L)

• Cooling: Liquid-cooled

• Fuel Tank Capacity: 33 gallons

Transmission

• Type: Power Shuttle or Power Reversing

• Speeds: 4 forward / 4 reverse

• Clutch System: Torque converter for smooth operation under load

Hydraulic System

• Pump Flow: 37 GPM

• System Pressure: 2,900 PSI

• Reservoir Capacity: 17.5 gallons

• Configuration: Open center system

• Parts Available: Ford 655D Hydraulic Seal Kits

Dimensions & Performance

• Operating Weight: ~15,000 lbs

• Backhoe Dig Depth: Up to 17 feet

• Loader Bucket Width: 84 inches

• Loader Capacity: 1.25 cubic yards

• Transport Length: Approx. 23.5 ft

• Wheelbase: 82.7 inches

Maintenance Essentials

• Replace worn hydraulic seals and hoses with Ford 655D Seal Kits

• Rebuild brakes using Brake Shoes and Master Cylinders

• Replace loader and backhoe bushings regularly to avoid pivot damage – Shop Pin & Bushing Kits

• Grease all pivot points daily to extend life of moving components

Common Issues & Fixes

• Transmission Hesitation or Slippage: Often caused by worn clutch packs or low shuttle pressure; check oil levels and replace damaged torque converter parts

• Brake Problems: Master cylinder or brake shoe wear is common—replace with brake repair kits

• Hydraulic System Weakness: Usually due to leaking seals or aged pumps—inspect for pressure loss and reseal with hydraulic kits

Serial Number Location

The serial number is typically located on the left side of the main tractor frame, just behind the loader arm mount. Always verify your serial number to ensure compatibility when ordering parts.

Pro Tips

• Change hydraulic fluid and filters every 250 hours to prevent wear

• Always use OEM-quality seals and pins for reliable performance

• Order spares for high-wear parts in advance to reduce downtime
  → Explore All Ford 655D Backhoe Parts