Case TV620B Track Loader – Parts, Specs

Description:

Serial Number Location

The serial number plate is located on the right-hand side of the lower track frame, near the rear final-drive housing. Always verify this number before ordering parts to ensure proper compatibility.

Key Specifications

• Model Years: 2025 – Present

• Engine: 8.7 L, 6-cylinder diesel, Tier 4 Final

• Net Power: 620 hp @ 2,000 rpm

• Operating Weight: 140,000 lb (with full fuel and standard bucket)

• Rated Operating Capacity: 44,000 lb

• Tipping Load: 88,000 lb

• Bucket Breakout Force: 140,000 lb

• Lift Height (to bucket hinge pin): 16 ft 0 in

• Ground Speed: Up to 12 mph (two-speed travel)

• Ground Pressure: 14.5 psi

• Track Width: 25 in

• Track Length on Ground: 15 ft 0 in

• Overall Width (with bucket): 12 ft 0 in

• Cab Height: 11 ft 8 in

• Fuel Tank Capacity: 125 gallons

• Hydraulic System Capacity: 150 gallons

• Auxiliary Hydraulic Flow: 110 gpm

• Hydraulic Operating Pressure: 5,400 psi

Performance & Design Highlights

• Super Heavy-Class Capability: 44,000 lb rated capacity and 140,000 lb breakout force engineered for the most demanding material handling

• Ultra-High-Flow Hydraulics: 110 gpm flow-sharing system ensures powerful, smooth attachment control even under load

• Spacious, Rugged Cab: ROPS/FOPS-certified with heated air-ride suspension seat, full automatic HVAC, panoramic visibility, and rear camera options

• Two-Speed Travel: Up to 12 mph for site movement; low-speed mode enhances control when loaded

• Reinforced Undercarriage: Heavy-duty rollers, robust final drives, and wide tracks designed for extreme hauling and rough terrain

Routine Maintenance

• Engine Oil & Filter: Service every 500 hours

• Hydraulic Fluid & Filters: Replace hydraulic fluid every 1,000 hours; replace filters every 500 hours

• Fuel Filter: Replace every 500 hours

• Air Filter: Inspect every 250 hours; replace if needed

• Track Tension & Grease Points: Inspect and lubricate daily

• Cooling System: Clean radiators and coolers weekly; monitor coolant level

Common Issues & Fixes

• Track Wear or Misalignment: Inspect tension and track components daily; replace worn parts promptly

• Hydraulic Hose Wear: Check hoses and fittings daily; replace when signs of abrasion or leakage appear

• Overheating: Maintain clear coolers and radiator cores; monitor coolant condition

• Electrical Alerts: Use onboard diagnostics to inspect wiring, fuses, and sensors

• Loss of Breakout Force: Replace worn bucket teeth; maintain clean hydraulic fluid and filters