Case TV450 Track Loader – Parts, Specs

Description:

Serial Number Location

The serial number plate is located on the right-hand side of the lower track frame, near the rear adjacent to the final-drive housing. Always verify it before ordering parts to ensure accurate compatibility.

Key Specifications

• Model Years: 2025 – Present

• Engine: 8.4 L, 6-cylinder diesel, Tier 4 Final

• Net Power: 450 hp @ 2,400 rpm

• Operating Weight: 70,000 lb (with full fuel and standard bucket)

• Rated Operating Capacity: 27,500 lb

• Tipping Load: 55,000 lb

• Bucket Breakout Force: 85,000 lb

• Lift Height (to bucket hinge pin): 14 ft 4 in

• Ground Speed: Up to 12 mph (two-speed travel)

• Ground Pressure: 12.0 psi

• Track Width: 20 in

• Track Length on Ground: 13 ft 0 in

• Overall Width (with bucket): 10 ft 0 in

• Cab Height: 11 ft 0 in

• Fuel Tank Capacity: 95 gallons

• Hydraulic System Capacity: 100 gallons

• Auxiliary Hydraulic Flow: 85 gpm

• Hydraulic Operating Pressure: 5,200 psi

Performance & Design Highlights

• Extreme Heavy-Class Capability: 27,500 lb rated capacity and 85,000 lb breakout force for demanding heavy material handling

• Ultra-High-Flow Hydraulics: 85 gpm flow-sharing system delivers maximum attachment efficiency and precise control

• Premium Cab: ROPS/FOPS-certified with heated air-ride suspension seat, full automatic HVAC, panoramic visibility, and rear camera

• Two-Speed Travel: Up to 12 mph; low-speed mode enhances control during heavy-load cycles

• Rugged Undercarriage: Heavy-duty rollers, reinforced final drives, and durable track frame engineered for extreme terrain

Routine Maintenance

• Engine Oil & Filter: Service every 500 hours

• Hydraulic Fluid & Filters: Change hydraulic fluid every 1,000 hours; filters every 500 hours

• Fuel Filter: Replace every 500 hours

• Air Filter: Inspect every 250 hours; replace as needed

• Track Tension & Grease Points: Inspect and lubricate daily

• Cooling System: Clean radiators and coolers weekly; check coolant level

Common Issues & Fixes

• Track Wear or Misalignment: Daily inspection of track tension, rollers, and sprockets—replace worn parts promptly

• Hydraulic Hose Wear: Inspect hoses and fittings daily; replace any with abrasion or leaks

• Overheating: Keep coolers and radiator core clean; monitor coolant condition

• Electrical or Sensor Alerts: Use onboard diagnostics to inspect wiring, fuses, and sensors

• Decline in Breakout Force: Replace worn bucket teeth and ensure hydraulic fluid and filters remain clean