The serial number plate is located on the right-hand side of the lower track frame, near the rear, just in front of the final drive assembly. Always verify before ordering parts.
Key Specifications
Model Years: 2025 – Present
Engine: 7.0 L, 6‑cylinder diesel, Tier 4 Final
Net Power: 310 hp @ 2,400 rpm
Operating Weight: 45,000 lb (with full fuel and standard bucket)
Rated Operating Capacity: 16,500 lb
Tipping Load: 33,000 lb
Bucket Breakout Force: 55,000 lb
Lift Height (to bucket hinge pin): 13 ft 0 in
Ground Speed: Up to 12 mph (two‑speed travel)
Ground Pressure: 8.5 psi
Track Width: 17 in
Track Length on Ground: 11 ft 0 in
Overall Width (with bucket): 9 ft 0 in
Cab Height: 9 ft 8 in
Fuel Tank Capacity: 70 gallons
Hydraulic System Capacity: 75 gallons
Auxiliary Hydraulic Flow: 65 gpm
Hydraulic Operating Pressure: 4,800 psi
Performance & Design Highlights
Heavy-Class Capacity: 16,500 lb rated capacity with strong 55,000 lb breakout force
High-Flow Hydraulics: Flow-sharing pump supports heavy attachments and smooth control feel
Comfortable Cab: ROPS/FOPS-certified with air-ride seat, full HVAC, and rearview camera
Two-Speed Travel: Up to 12 mph; low-speed mode enhances control under load
Durable Undercarriage: Heavy-duty rollers, reinforced frames, and strong tracks for tough terrain
Routine Maintenance
Engine Oil & Filter: Replace every 500 hours
Hydraulic Fluid & Filters: Change hydraulic oil every 1,000 hours; filters every 500 hours
Fuel Filter: Replace every 500 hours
Air Filter: Inspect every 250 hours; replace as needed
Track Tension & Grease Points: Inspect and grease daily
Cooling System: Clean radiator and coolers weekly; check coolant level
Common Issues & Fixes
Track Wear or Misalignment: Check tension and inspect rollers & sprockets daily—replace worn parts promptly
Hydraulic Hose Wear: Inspect hoses and fittings daily; replace any showing abrasion or leaks
Overheating: Keep coolers and radiator clear of dirt; monitor coolant levels
Electrical Faults: Use onboard diagnostics to identify wiring, fuse, or sensor issues
Breakout Force Loss: Replace worn bucket teeth and ensure clean hydraulic fluid/filter
Out of Stock
This item is OUT OF STOCK and must be special ordered.
Please call us to check availability.
Can’t Find What You’re Looking For?
Our knowledgeable staff will be happy to help you with any of your tractor, backhoe, dozer, or engine parts needs.
Do you need your part quickly? You're in luck! We have warehouses all over the country to ensure a quick and easy delivery time. Most of our parts ship from our warehouses the same day you place your order. And many times, orders are delivered in Two to Three days.
Our in house parts are manufactured following strict quality standards in our warehouse in Ohio. Parts such as hydraulic cylinders, pins, bushings, sheet metal, track adjusters, booms and dipper sticks are all ready to ship same day that they are purchased! With less time to wait for your shipment, you will be able to get back to work as quickly as possible.
Did you accidentally purchase the incorrect part? We offer returns and exchanges here at Broken Tractor. To proceed with a return, please call us toll free, and we will provide you with return authorization and a step by step return process for your convenience. We are more than happy to help you exchange your part for the correct one! Give us a call at 1-800-909-7060 and we would be pleased to help you.
This is the navigation bar. This shows the category you're currently viewing and allows you to explore back to previous categories.
See Details
See Details
See Details
See Details
See Details
