New Holland L216 Skid Steer Loader – Specs, Parts & Maintenance Guide

Description:

The New Holland L216 Skid Steer Loader is a compact, cost-effective machine built for productivity in tight spaces. It delivers excellent lift capacity and maneuverability with its radial lift design, making it perfect for landscaping, material handling, and light construction work.

Powered by a reliable Tier 4 Final engine and featuring straightforward maintenance access, the L216 is ideal for small contractors and farmers who need dependable performance in a low-profile package. Its operator-friendly cab and mechanical controls make it easy to use and maintain.

Specifications

Engine:

• Make: FPT (Fiat Powertrain Technologies)

• Model: F5H

• Emissions Tier: Tier 4 Final (CEGR + Diesel Oxidation Catalyst)

• Displacement: 135 cu in (2.2 L)

• Gross Horsepower: 60 hp (44.7 kW)

• Peak Torque: 153 lb-ft (207 Nm)

Transmission:

• Type: Hydrostatic

• Travel Speed: 7.1 mph (11.4 km/h)

• Optional Two-Speed: Not available on this model

Hydraulic System:

• Standard Flow: 18.5 gallons per minute (70 L/min)

• Hydraulic Pressure: 3,000 psi (207 bar)

Performance:

• Rated Operating Capacity (ROC): 1,600 lbs (726 kg)

• Tipping Load: 3,200 lbs (1,451 kg)

• Breakout Force (Bucket): 4,150 lbs (18.5 kN)

Dimensions:

• Operating Weight: 5,845 lbs (2,652 kg)

• Height to ROPS: 75.4 in (1.92 m)

• Length with Bucket: 124.3 in (3.16 m)

• Dump Height: 84.2 in (2.14 m)

Maintenance Essentials

• Engine Oil, Fuel, and Hydraulic Filters: Replace every 500 hours or per manufacturer interval.
  Shop Filter Kits for New Holland L216

• Loader Pins and Bushings: Common wear points due to repeated loading cycles.
  Find Loader Pins & Bushings for L216

• Hydraulic Cylinder Kits: Required for bucket and lift arm rebuilds.
  Browse Hydraulic Kits for NH L216

• Drive Belt and Cooling Fan Inspection: Recommended every 250 hours to prevent overheating and slippage.

Common Issues and Fixes

Hydraulic Drifting: Bucket or lift arms may drift due to internal seal wear.
Fix: Install Hydraulic Cylinder Seal Kits

Starter Delay or No Crank: Frequently caused by weak batteries or corroded ground cables.

Rough Engine Idle: Often due to clogged fuel filters or EGR buildup.
Fix: Replace filters and inspect the emissions system.

Premature Bushing Wear: Loader arms may develop play at the pivot points.
Fix: Replace bushings and pins.

Serial Number Information

• Location: Left rear corner of the machine frame, near the loader arm pin mount or ROPS.

• Tip: Serial number prefixes will help identify model year and ensure correct part selection.