Serial Number Information
The serial number plate for the New Holland DC180 is typically located on the left-hand side of the machine frame below the operator platform or on the rear crossmember near the undercarriage. Use your serial number to confirm:
-
Engine configuration (Tier 3 compliance)
-
Hydraulic pump output and compatibility
-
Blade type and control system
Key Specifications
| Feature |
Specification |
| Engine Model |
Iveco 6-cylinder turbocharged diesel |
| Emissions Compliance |
Tier 3 |
| Net Power |
180 HP (134 kW) @ 2,200 RPM |
| Transmission |
Hydrostatic, variable speed |
| Operating Weight |
44,300 lbs (20,100 kg) |
| Blade Capacity |
7.8 yd³ (Semi-U) |
| Ground Pressure |
6.8 psi |
| Track Width |
22 in (560 mm) |
| Hydraulic Flow |
50 GPM (190 L/min) |
| Travel Speed (Fwd/Rev) |
6.2 mph (10 km/h) |
Performance
| Feature |
Specification |
| Traction Type |
Crawler (Steel Tracks) |
| Blade Type |
Semi-U |
| Hydrostatic Drive |
Full-range variable speed in both directions |
| High Hydraulic Flow |
50 GPM for responsive blade and implement control |
Key Features
Proven Tier 3 Iveco Power
Equipped with a 180 HP turbo diesel engine, the DC180 provides reliable output for pushing, grading, and slope applications. Tier 3 emissions compliance offers simpler maintenance with fewer aftertreatment components.
Hydrostatic Transmission
Variable speed control provides optimal torque to each track, increasing maneuverability on slopes and tight jobsites. Ideal for precision grading and push-heavy work.
High-Capacity Blade
The 7.8 cubic yard Semi-U blade is designed for bulk material handling, from stockpiles to fill spreading. Robust enough for earthmoving and site prep work.
Optimized Ground Pressure
With 22-inch track width and 6.8 psi ground pressure, this dozer balances flotation and traction for a variety of surface conditions.
Common Replacement Parts
Reliable parts for the New Holland DC180 are available at Broken Tractor:
Engine & Fuel
Hydrostatic Transmission
Undercarriage
-
Sprockets, track chains, rollers, idlers, track tensioners
Blade System
Cab & Electrical
-
Instrument clusters, seats, joystick controls, alternators, light kits
Maintenance Schedule
| Task |
Recommended Interval |
| Engine Oil & Filter |
Every 250 hours |
| Hydraulic Filter & Fluid |
Every 500 hours |
| Fuel Filter Replacement |
Every 250 hours |
| Air Filter Service |
Every 100–250 hours depending on environment |
| Final Drive Oil Check |
Every 500 hours |
| Track & Undercarriage Inspection |
Weekly or as needed |
See Details
