Description:
Serial Number Information
The serial number plate on the New Holland D180C is typically located on the left side of the main frame under the cab access platform or near the rear undercarriage area. Use your serial number to confirm:
-
Blade configuration and hydraulic compatibility
-
Emission system (Tier 4 Final compliance)
-
Engine and transmission version
Key Specifications
| Feature |
Specification |
| Engine Model |
FPT NEF 6-cylinder turbocharged diesel |
| Emissions |
Tier 4 Final compliant |
| Net Power |
214 HP (160 kW) @ 2,200 RPM |
| Transmission |
Hydrostatic, variable speed |
| Operating Weight |
48,060 lbs (21,800 kg) |
| Blade Capacity |
5.95 yd³ (Straight Tilt), 7.24 yd³ (Semi-U) |
| Track Width |
30 in (760 mm) |
| Ground Pressure |
6.3 psi |
| Travel Speed |
Forward/Reverse: 6.8 mph (11 km/h) |
Performance
| Feature |
Specification |
| Traction Type |
Crawler (Steel Tracks) |
| Blade Options |
Straight Tilt, Semi-U |
| Speed Range |
Fully variable via hydrostatic drive |
| Fuel Efficiency |
Enhanced with electronically controlled engine and hydrostatic system |
Key Features
Tier 4 Final FPT Engine
Delivers 214 HP of fuel-efficient power with lower emissions using advanced after-treatment technologies, including DOC, DPF, and SCR.
Hydrostatic Transmission
Smooth and precise control at variable speeds with maximum torque to the ground, ideal for grading and dozing in heavy material or slope applications.
Blade Versatility
Supports straight tilt and semi-U blade options, ranging from 5.95 to 7.24 cubic yards for handling various dozing, spreading, and leveling tasks.
Low Ground Pressure
With a wide 30-inch track and ground pressure of 6.3 psi, the D180C minimizes surface disturbance and improves flotation in soft terrain.
Common Replacement Parts
Get durable and OEM-quality parts for the New Holland D180C at Broken Tractor:
Engine Components
Transmission & Drive
Undercarriage
-
Track chains, rollers, sprockets, idlers, tensioner assemblies
Blades & Hydraulics
Cab & Controls
Maintenance Schedule
| Task |
Recommended Interval |
| Engine Oil & Filter |
Every 250 hours |
| Hydraulic Oil & Filter |
Every 500 hours |
| Fuel Filter Replacement |
Every 250 hours |
| Air Filter Cleaning |
100–250 hours depending on dust levels |
| Final Drive Oil Check |
Every 500 hours |
| Undercarriage Inspection |
Weekly or as needed |
See Details
