New Holland C332 Compact Track Loader – Parts, Specs & Common Issues

Description:

The New Holland C332 Compact Track Loader is a versatile, high-performance machine equipped with a vertical lift Super Boom™, making it ideal for loading, lifting, and material handling at height. Powered by a Tier 4 Final engine and built on a durable undercarriage with steel-embedded rubber tracks, the C332 offers powerful hydraulics, advanced controls, and excellent operator comfort for demanding applications in construction, agriculture, and landscaping.

Key Specifications & Features:

Engine:

• Model: FPT F5H FL413J

• Type: Turbocharged, 4-cylinder diesel

• Emissions System: Tier 4 Final – DOC + SCR (No DPF)

• Displacement: 3.4L (207 cu in)

• Power Output: 74 hp (gross), 68 hp (net)

• Fuel Tank Capacity: 25.5 gallons

Transmission & Drive:

• Hydrostatic Transmission

• Optional Two-Speed Travel

• Steel-Embedded Rubber Tracks

• Travel Speeds: 5.0 mph (low), 7.8 mph (high)

Hydraulics:

• Standard Flow: 24.2 GPM

• High-Flow Option: 37.6 GPM

• System Pressure: 3,450 psi

• Flat-Face Auxiliary Couplers

Dimensions & Capacity:

• Operating Weight: 9,630 lbs

• Rated Operating Capacity (50% tip load): 3,150 lbs

• Lift Height to Hinge Pin: 132 in

• Dump Reach at Max Height: 32.5 in

• Width (w/ bucket): 77 in

• Ground Clearance: 8.5 in

Maintenance Essentials & Common Replacement Parts:

• Hydraulic cylinder kits for boom and bucket

• Rubber tracks, sprockets, and idlers

• Fuel filters, air filters, and oil filters

• Track tensioners and carrier rollers

• DEF system components and sensors

Common Issues & Quick Fixes:

1. DEF System Errors: Faulty level or NOx sensors can cause derate—flush system and replace with OEM sensors.
2. Hydraulic Leakages: Worn seals or pinched lines near articulation points; replace with hydraulic seal kits.
3. Premature Track Wear: Caused by poor tensioning or misalignment—inspect and replace with track components.
4. Electrical Faults: Display or control glitches may require a CAN-bus reset or battery terminal inspection.

Pro Tips:

• Use genuine DEF fluid and store it correctly to avoid crystallization in sensors.

• Clean cooling cores regularly to prevent overheating in dusty environments.

• Monitor lift arm pivot points for bushing wear—grease daily under heavy use.

Serial Number Info:

• Location: On the left side of the frame under cab access or loader arm support

• Format: Begins with “JAF” followed by machine-specific digits