New Holland C238 Compact Track Loader – Parts, Specs & Common Issues

Description:

The New Holland C238 Compact Track Loader is a heavy-duty machine built for high performance in demanding environments. With vertical lift geometry, advanced hydraulics, and a Tier 4 Final engine, the C238 is ideal for lift-and-carry jobs, grading, and high-capacity material handling. Its rugged undercarriage and wide cab offer durability and operator comfort.

Key Specifications & Features:

Engine:

• Model: FPT F5H FL413G*B002

• Type: Turbocharged, Tier 4 Final, DOC + SCR (no DPF)

• Displacement: 3.4L (207 cu in)

• Power Output: 90 hp (gross), 84 hp (net)

• Fuel Capacity: 31.8 gallons

Transmission & Drive:

• Hydrostatic two-speed transmission

• Rubber-tracked undercarriage for soft or unstable terrain

• Travel Speed: 5.2 mph (low), 7.6 mph (high)

Hydraulics:

• Standard Flow: 24.2 GPM

• High-Flow Option: Up to 37.6 GPM

• System Pressure: 3,450 psi

• Auxiliary quick couplers standard

Dimensions & Capacity:

• Operating Weight: 10,610 lbs

• Rated Operating Capacity (50% tip): 3,800 lbs

• Lift Height to Hinge Pin: 131.1 in

• Dump Reach at Max Height: 33.3 in

• Overall Width (with bucket): 80 in

• Ground Clearance: 9.6 in

Maintenance Essentials & Common Replacement Parts:

• Track tensioners and rubber tracks

• Drive motor seal kits

• Hydraulic cylinder kits

• Fuel, air, and oil filters

• Cooling system components and sensors

Common Issues & Quick Fixes:

1. DEF System Faults: SCR and sensor issues can cause engine derates—flush DEF lines and replace faulty sensors.
2. Hydraulic Overheating: Often due to clogged coolers or low fluid—clean radiators and refill with OEM-spec hydraulic fluid.
3. Track Wear or De-tracking: Replace worn sprockets and track tensioners to prevent misalignment.
4. Joystick Calibration Errors: May require software reset or sensor inspection by a dealer.

Pro Tips:

• Avoid idling the engine excessively in cold weather to protect the SCR system.

• Regularly check undercarriage wear, especially if operating on abrasive terrain.

• Use high-flow attachments only when necessary to extend pump lifespan.

Serial Number Info:

• Location: Plate located on the inside left of the loader arm or on the cab support frame

• Format: Begins with “JAF” followed by production number and model code