New Holland C232 Compact Track Loader – Parts, Specs & Common Issues

Description:

The New Holland C232 Compact Track Loader delivers reliable power and lifting capacity in a mid-frame design, perfect for digging, grading, and loading in demanding environments. With a radial lift design, Tier 4 Final emissions compliance, and rugged steel-embedded rubber tracks, the C232 combines productivity with operator comfort and serviceability.

Key Specifications & Features:

Engine:

• Model: FPT F5H FL413J

• Type: Turbocharged, 4-cylinder diesel

• Emissions System: Tier 4 Final (DOC + SCR, no DPF)

• Displacement: 3.4L (207 cu in)

• Power Output: 74 hp (gross), 68 hp (net)

• Fuel Tank Capacity: 25.5 gallons

Transmission & Drive:

• Hydrostatic transmission

• Two-speed travel (optional)

• Steel-embedded rubber track undercarriage

• Travel Speeds: 5.0 mph (low), 7.8 mph (high)

Hydraulics:

• Standard Flow: 24.2 GPM

• High Flow (optional): 37.6 GPM

• System Pressure: 3,450 psi

• Auxiliary Hydraulic Lines with Flat-Face Couplers

Dimensions & Capacity:

• Operating Weight: 9,630 lbs

• Rated Operating Capacity (50% tip): 3,200 lbs

• Lift Height to Hinge Pin: 125 in

• Dump Reach at Max Height: 31.1 in

• Overall Width (with bucket): 77 in

• Ground Clearance: 8.5 in

Maintenance Essentials & Common Replacement Parts:

• Hydraulic seal kits for boom and bucket cylinders

• Rubber tracks, idlers, and sprockets

• Fuel, oil, and air filters

• Track tensioner assemblies

• DEF system sensors

Common Issues & Quick Fixes:

1. DEF Sensor Failures: Faulty sensors can cause engine derating—replace with OEM-quality DEF components.
2. Hydraulic Line Wear: High-pressure lines near lift arms are prone to abrasion—replace hoses and inspect fittings regularly.
3. Track Misalignment: Typically caused by worn tensioners or sprockets—replace with C232 track kits.
4. Joystick Calibration Errors: Fix via system reset or software update through dealer interface.

Pro Tips:

• Perform frequent undercarriage cleanouts to extend life of tracks and rollers.

• Avoid DEF contamination by storing fluid in sealed, clean containers.

• Use only attachments rated for C232’s hydraulic output to prevent system overload.

Serial Number Info:

• Location: On the left side of the loader frame, near the cab entrance

• Format: Starts with “JAF” followed by a unique series of digits