New Holland B95D Backhoe Loader – Parts, Specs & Serial Number Guide

Description:

The New Holland B95D Backhoe Loader is the latest evolution in the B95 lineup, offering upgraded electronics, improved hydraulics, and Tier 4 Final emissions compliance. Designed for rugged performance and precision control, the B95D features a 3.4L FPT turbo diesel engine, powershift transmission, and a refined joystick-controlled backhoe system. With strong breakout forces, easy service access, and operator comfort upgrades, it’s a favorite for contractors and municipalities looking for high ROI and durability.

Whether you're repairing worn hydraulic cylinders, sourcing brake parts, or replacing loader pins, BrokenTractor.com offers all the replacement parts you need to keep your B95D operating at peak performance.

Engine Specifications

• Engine Make: FPT (Fiat Powertrain Technologies)

• Model: F5HFL413B

• Type: 3.4L, 4-cylinder turbocharged diesel

• Gross Horsepower: 97 hp

• Emissions Compliance: Tier 4 Final (SCR & DOC, no DPF)

• Fuel Tank Capacity: 31.7 gallons

• Cooling System: Liquid-cooled

Transmission

• Type: Powershift

• Configuration: 4 forward / 4 reverse gears

• Drive: 4WD standard

• Top Speed: Approx. 23 mph

• Clutch: Torque converter with electronic modulation

Hydraulic System

• System Type: Open-center

• Pump Flow: 28.5 GPM

• System Pressure: 3,045 PSI

• Hydraulic Reservoir Capacity: Approx. 13.7 gallons

• Common Replacement Parts: New Holland B95D Hydraulic Seal Kits

Dimensions & Performance

• Operating Weight: ~17,560 lbs

• Backhoe Max Dig Depth: 14 ft 6 in (18 ft with Extendahoe)

• Loader Bucket Width: 82–96 inches

• Loader Lift Capacity: Approx. 7,000 lbs

• Transport Length: 23.3 ft

• Wheelbase: 84 inches

Maintenance Essentials

• Hydraulic Seals: Inspect cylinders regularly—use seal kits to fix leaks

• Wet Disc Brakes: Low-maintenance system—replace brake valves or seals as needed → B95D Brake Kits

• Loader Pins & Bushings: Common wear points—inspect every 100 hours → Pin & Bushing Kits

• Engine Oil, Hydraulic Fluid, Fuel Filter: Change every 250 hours for optimal performance

Common Issues & Fixes

• Backhoe Cylinder Drift: Often due to internal seal wear—replace with high-quality seal kits

• Jerky or Delayed Gear Changes: Check for faulty transmission solenoids or fluid contamination

• Hydraulic Noise or Lag: Caused by air in the system or worn pump—bleed system and inspect pump inlet

• DEF System Faults: Check SCR system sensors and DEF fluid levels (Tier 4 Final compliance)

Serial Number Location

The serial number plate is usually found on the right side of the machine frame behind the loader tower, or under the right cab entry step. This number is critical for confirming part compatibility before ordering.

Pro Tips

• The B95D uses a no-DPF Tier 4 Final engine, which reduces maintenance versus earlier emission systems

• Use OEM fluid specs for DEF and hydraulic systems to prevent component failure

• Always grease stabilizers, loader pivots, and extendahoe daily
  → Browse All New Holland B95D Parts Here