New Holland B75D Backhoe Loader – Parts, Specs & Serial Number Guide

The New Holland B75D Backhoe Loader is a compact yet powerful machine designed for contractors, municipalities, and utility crews who need performance and versatility in tight working spaces. Offering standard 4WD, a powerful 3.4L FPT diesel engine, and excellent serviceability, the B75D delivers professional-grade productivity without the bulk of a full-size backhoe.

With features like a dig depth of over 14 feet, joystick controls, and efficient hydraulics, the B75D is a modern and cost-effective solution for everyday backhoe loader needs.

Engine Specifications

• Engine Make: FPT (Fiat Powertrain Technologies)

• Model: F5HFL413B

• Engine Type: 3.4L 4-cylinder turbocharged diesel

• Horsepower: 74 hp gross

• Emission Rating: Tier 4 Final / Stage V

• Fuel Tank Capacity: 30 gallons

Transmission

• Type: Synchro shuttle transmission

• Speeds: 4 forward / 4 reverse

• Drive: Standard 4WD

• Shifting: Mechanical shuttle lever with synchro mesh gear shifts

Hydraulic System

• System Type: Open-center

• Pump Flow: 25.5 GPM total

• System Pressure: Approx. 3,000 PSI

• Hydraulic Reservoir Capacity: 13.7 gallons

• Key Parts: New Holland B75D Hydraulic Seal Kits

Dimensions & Performance

• Operating Weight: ~17,560 lbs

• Backhoe Max Dig Depth: 14 ft 6 in

• Loader Bucket Width: 82 inches

• Loader Lift Capacity: ~6,500 lbs at max height

• Transport Length: 23.3 ft

• Wheelbase: 82.7 in

Maintenance Essentials

• Routine Fluid Changes: Engine oil, hydraulic fluid, and coolant—every 250 hours

• Hydraulic Cylinder Seals: Common wear item—replace with seal kits

• Braking System: Wet disc brakes require less frequent maintenance but monitor fluid quality

• Loader Pins & Bushings: Check pivot points regularly and replace with bushing kits

Common Issues & Fixes

• Hydraulic Leak at Cylinders: Caused by worn rod seals – reseal with hydraulic seal kits

• Loader Drift: Often traced to internal cylinder bypassing – inspect cylinder condition

• Transmission Noise or Jerky Shifting: Caused by low shuttle oil or worn synchro gears – check fluid and linkage

Serial Number Location

The serial number plate is typically located on the right side of the tractor frame behind the loader tower or on the engine housing under the cab entry step. Always use this number to verify part compatibility when ordering.

Pro Tips

• The B75D comes with standard auxiliary hydraulics—great for hammers and thumbs

• Use multi-season hydraulic fluid for consistent performance in variable climates

• Grease loader and backhoe pivots before and after each workday to extend pin life
  → Shop New Holland B75D Parts at BrokenTractor.com